Bureaucrats, dave_user, Administrators
8,154
edits
Changes
→Temperature sensors
|}
<section begin=Console/>
==Console UART==
{| class="wikitable"
|-
|}
<section end=Console/>
<section begin=Ethernet/>
==Ethernet==
Ethernet port is associated to <code>eth0</code> interface on the J8 connector. It can be managed with standard Linux commands. See for example http://www.tecmint.com/ifconfig-command-examples/.
<section end=Ethernet/>
<section begin=micro SD/>
==microSD card==
microSD card on connector J21, if present, will be associated by the Linux kernel to the <code>mmcblk0</code> device:
root@bora:~#
</pre>
<section end=micro SD/>
==NOR and NAND flash==
</pre>
<section begin=USB OTG/>
==USB OTG==
===Host mode===
On PC side, BoraEVB (or BoraXEVB) is detected as a common USB mass storage device.
<section end=USB OTG/>
<section begin=CAN/>
==CAN==
See [[Advanced_use_of_Yocto_build_system_(BELK/BXELK)]] for more information about using Yocto packages and <code>smart</code>
<section end=CAN/>
<section begin=UART0/>
==UART0==
UART0 is a spare UART device available on the JP17 PMOD connector. This device is routed through the PL.
|-
|}
<section end=UART0/>
<section begin=Temperature sensors/>
== Temperature sensors ==
Bora SOM has a [http://www.ti.com/lit/ds/symlink/tmp422.pdf TMP421AIDCN] temperature sensor onboard.
echo "Cpu Temp: ${TEMP}"
</pre>
<section end=Temperature sensors/>
<section begin=Power meter/>
== Power consumption ==
root@bora:~#
</pre>
<section end=Power meter/>
