Open main menu

DAVE Developer's Wiki β

Changes

ORCA-TN-001 — Running Armbian Bullseye (Debian 11)

43,851 bytes added, 12:55, 31 January 2023
no edit summary
==Testbed==
==Deploying Building and deploying the root file system onto the target==
https://armbian.site-meganet.com/dl/uefi-arm64/archive/Armbian_22.11.1_Uefi-arm64_bullseye_current_5.15.80_minimal.img.xz
...
[ OK ] Finished Update UTMP about System Runlevel Changes.
You are in emergency mode. After logging in, type "journalctl -xb" to view
system logs, "systemctl reboot" to reboot, "systemGive root password for maintenance
(or press Control-D to continue):
root@uefi-arm64:~# sudo mount -o remount,rw cat /dev/mmcblk1p3 etc/fstab[ 558.839904] EXT4UUID=41eabd71-fs (mmcblk1p3): reef7f-mounted. Opts: (null)root@uefi4a75-arm64:~# sudo systemctl stop NetworkManager.serviceroot@uefi94a0-arm64:~# sudo systemctl disable NetworkManager.serviceRemoved 3a55dbacbaea /etc/systemd/system/multiext4 defaults,noatime,commit=600,errors=remount-user.target.wants/NetworkManager.service.ro 0 1Removed #UUID=7EEE-611C /etcboot/systemdefi vfat defaults 0 2tmpfs /system/dbus-org.freedesktop.nm-dispatcher.service.tmp tmpfs defaults,nosuid 0 0
==Bootstrap process==
U-Boot SPL 2020.04-desk-mx8m-l-2.0.0-rc2+fslc+g32087d457a (Dec 20 2022 - 15:01:10 +0000)
SOM ConfigID not found, using default
SOM ConfigID#: ffffffff
DDRINFO: start DRAM init
DDRINFO: DRAM rate 4000MTS
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
Normal Boot
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0
NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-0-g2a2678646
NOTICE: BL31: Built : 22:11:34, Dec 15 2021
 
 
U-Boot 2020.04-desk-mx8m-l-2.0.0-rc2+fslc+g32087d457a (Dec 20 2022 - 15:01:10 +0000)
 
CPU: i.MX8MP[8] rev1.1 1800 MHz (running at 1200 MHz)
CPU: Commercial temperature grade (0C to 95C) at 46C
Reset cause: POR
Model: DAVE i.MX8MPlus on SBC ORCA Rev A
DRAM: 6 GiB
TCPC: Vendor ID [0x1fc9], Product ID [0x5110], Addr [I2C2 0x50]
tcpc_init: Can't find device id=0x3d
MMC: FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
Fail to setup video link
In: serial
Out: serial
Err: serial
 
BuildInfo:
- ATF 2a26786
- U-Boot 2020.04-desk-mx8m-l-2.0.0-rc2+fslc+g32087d457a
 
SOM ConfigID not found, using default
SOM ConfigID#: ffffffff
SOM UniqueID#: 0002aaff:a32f16cc
CB ConfigID#: 00001001
CB UniqueID#: 00000000:00000000
SOM ConfigID not found, using default
SOM: Unknown on SBC ORCA
switch to partitions #0, OK
mmc1 is current device
flash target is MMC:1
Net:
Warning: ethernet@30be0000 (eth0) using random MAC address - 5e:83:9d:9b:04:e4
eth0: ethernet@30be0000
Fastboot: Normal
Normal Boot
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc1 is current device
1084 bytes read in 13 ms (81.1 KiB/s)
Running bootscript from mmc ...
## Executing script at 40480000
bootscript generated with command "mkimage -A ARM -T script -C none -n DESK-MX8M -d bootscript.txt boot.scr"
Booting DESK-MX8M via mmcboot with imx8mp-mito8mplus-cb1001.dtb as device tree
30931456 bytes read in 1325 ms (22.3 MiB/s)
59285 bytes read in 19 ms (3 MiB/s)
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Using Device Tree in place at 0000000043000000, end 0000000043011794
 
Starting kernel ...
 
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.15.32-00007-gfe10aa07dfca-dirty (rborsellino@bionicbakery) (aarch64-poky-linux-gcc (GCC) 11.2.0, GNU ld (
GNU Binutils) 2.38.20220313) #2 SMP PREEMPT Wed Oct 26 08:58:42 CEST 2022
[ 0.000000] Machine model: i.MX8MPlus Mito8MPlus on SBC Orca
[ 0.000000] earlycon: ec_imx6q0 at MMIO 0x0000000030890000 (options '115200')
[ 0.000000] printk: bootconsole [ec_imx6q0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000c4000000, size 960 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000094300000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vdev0buffer@94300000, compatible id shared-dma-pool
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000001bfffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x1bf44f800-0x1bf451fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001bfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000557fffff]
[ 0.000000] node 0: [mem 0x0000000055800000-0x0000000055ffffff]
[ 0.000000] node 0: [mem 0x0000000058000000-0x00000000923fffff]
[ 0.000000] node 0: [mem 0x0000000092400000-0x00000000a43fffff]
[ 0.000000] node 0: [mem 0x00000000a4400000-0x00000001bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000001bfffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 20 pages/cpu s41176 r8192 d32552 u81920
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1540096
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200 root=/dev/mmcblk1p3
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x00000000c0000000-0x00000000c4000000] (64MB)
[ 0.000000] Memory: 4752512K/6258688K available (18560K kernel code, 1534K rwdata, 7072K rodata, 2944K init, 541K bss, 523136K reserv
ed, 983040K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 160 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000
[ 0.000000] ITS: No ITS available, not enabling LPIs
[ 0.000000] random: get_random_bytes called from start_kernel+0x474/0x660 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns
[ 0.000000] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns
[ 0.008452] Console: colour dummy device 80x25
[ 0.012574] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000)
[ 0.022841] pid_max: default: 32768 minimum: 301
[ 0.027528] LSM: Security Framework initializing
[ 0.032172] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.039749] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.048941] rcu: Hierarchical SRCU implementation.
[ 0.053747] EFI services will not be available.
[ 0.057332] smp: Bringing up secondary CPUs ...
[ 0.062081] Detected VIPT I-cache on CPU1
[ 0.062105] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000
[ 0.062140] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.062560] Detected VIPT I-cache on CPU2
[ 0.062578] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000
[ 0.062597] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.062991] Detected VIPT I-cache on CPU3
[ 0.063010] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000
[ 0.063030] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.063094] smp: Brought up 1 node, 4 CPUs
[ 0.118314] SMP: Total of 4 processors activated.
[ 0.123031] CPU features: detected: 32-bit EL0 Support
[ 0.128207] CPU features: detected: 32-bit EL1 Support
[ 0.133356] CPU features: detected: CRC32 instructions
[ 0.145828] CPU: All CPU(s) started at EL2
[ 0.147109] alternatives: patching kernel code
[ 0.153158] devtmpfs: initialized
[ 0.162466] KASLR disabled due to lack of seed
[ 0.164216] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.173882] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.216102] pinctrl core: initialized pinctrl subsystem
[ 0.219000] DMI not present or invalid.
[ 0.222712] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.233145] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.237940] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.245899] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.253486] audit: initializing netlink subsys (disabled)
[ 0.258998] audit: type=2000 audit(0.200:1): state=initialized audit_enabled=0 res=1
[ 0.259544] thermal_sys: Registered thermal governor 'step_wise'
[ 0.266619] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.272925] cpuidle: using governor menu
[ 0.283320] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.290054] ASID allocator initialised with 65536 entries
[ 0.296378] Serial: AMBA PL011 UART driver
[ 0.299571] imx mu driver is registered.
[ 0.303459] imx rpmsg driver is registered.
[ 0.318256] imx8mp-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver
[ 0.337368] platform 32fd8000.hdmi: Fixing up cyclic dependency with 32fc6000.lcd-controller
[ 0.364575] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.368469] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.375237] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.381933] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.389686] cryptd: max_cpu_qlen set to 1000
[ 0.395774] ACPI: Interpreter disabled.
[ 0.397530] iommu: Default domain type: Translated
[ 0.401712] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.408174] vgaarb: loaded
[ 0.410978] SCSI subsystem initialized
[ 0.414794] usbcore: registered new interface driver usbfs
[ 0.420033] usbcore: registered new interface driver hub
[ 0.425353] usbcore: registered new device driver usb
[ 0.431353] mc: Linux media interface: v0.10
[ 0.434717] videodev: Linux video capture interface: v2.00
[ 0.440277] pps_core: LinuxPPS API ver. 1 registered
[ 0.445194] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.454401] PTP clock support registered
[ 0.458498] EDAC MC: Ver: 3.0.0
[ 0.462556] FPGA manager framework
[ 0.464955] Advanced Linux Sound Architecture Driver Initialized.
[ 0.471511] Bluetooth: Core ver 2.22
[ 0.474609] NET: Registered PF_BLUETOOTH protocol family
[ 0.479935] Bluetooth: HCI device and connection manager initialized
[ 0.486324] Bluetooth: HCI socket layer initialized
[ 0.491221] Bluetooth: L2CAP socket layer initialized
[ 0.496303] Bluetooth: SCO socket layer initialized
[ 0.501797] clocksource: Switched to clocksource arch_sys_counter
[ 0.507469] VFS: Disk quotas dquot_6.6.0
[ 0.511302] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.518318] pnp: PnP ACPI: disabled
[ 0.527865] NET: Registered PF_INET protocol family
[ 0.530114] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.540407] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.546229] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.554489] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.562451] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.568221] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.575051] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.582411] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.588218] RPC: Registered named UNIX socket transport module.
[ 0.593819] RPC: Registered udp transport module.
[ 0.598553] RPC: Registered tcp transport module.
[ 0.603264] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.610422] PCI: CLS 0 bytes, default 64
[ 0.614329] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.622618] kvm [1]: IPA Size Limit: 40 bits
[ 0.627805] kvm [1]: GICv3: no GICV resource entry
[ 0.631003] kvm [1]: disabling GICv2 emulation
[ 0.635467] kvm [1]: GIC system register CPU interface enabled
[ 0.641398] kvm [1]: vgic interrupt IRQ9
[ 0.645379] kvm [1]: Hyp mode initialized successfully
[ 0.653435] Initialise system trusted keyrings
[ 0.655159] workingset: timestamp_bits=42 max_order=21 bucket_order=0
[ 0.667445] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.671002] NFS: Registering the id_resolver key type
[ 0.675546] Key type id_resolver registered
[ 0.679725] Key type id_legacy registered
[ 0.683818] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.690488] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.697943] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.704373] 9p: Installing v9fs 9p2000 file system support
[ 0.744904] Key type asymmetric registered
[ 0.746156] Asymmetric key parser 'x509' registered
[ 0.751099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.758491] io scheduler mq-deadline registered
[ 0.763040] io scheduler kyber registered
[ 0.773725] EINJ: ACPI disabled.
[ 0.784543] imx-sdma 30bd0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
[ 0.787457] mxs-dma 33000000.dma-apbh: initialized
[ 0.792209] imx-sdma 30bd0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin
[ 0.798661] SoC: i.MX8MP revision 1.1
[ 0.810800] Bus freq driver module loaded
[ 0.820322] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.825997] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 31, base_baud = 5000000) is a IMX
[ 0.833120] 30880000.serial: ttymxc2 at MMIO 0x30880000 (irq = 32, base_baud = 5000000) is a IMX
[ 0.841867] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 33, base_baud = 1500000) is a IMX
[ 0.850339] printk: console [ttymxc1] enabled
[ 0.850339] printk: console [ttymxc1] enabled
[ 0.858975] printk: bootconsole [ec_imx6q0] disabled
[ 0.858975] printk: bootconsole [ec_imx6q0] disabled
[ 0.882487] loop: module loaded
[ 0.887025] megasas: 07.717.02.00-rc1
[ 0.892265] imx ahci driver is registered.
[ 0.901941] tun: Universal TUN/TAP device driver, 1.6
[ 0.907894] thunder_xcv, ver 1.0
[ 0.911167] thunder_bgx, ver 1.0
[ 0.914436] nicpf, ver 1.0
[ 0.919391] hclge is initializing
[ 0.922730] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 0.929960] hns3: Copyright (c) 2017 Huawei Corporation.
[ 0.935325] e1000: Intel(R) PRO/1000 Network Driver
[ 0.940209] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.945999] e1000e: Intel(R) PRO/1000 Network Driver
[ 0.950969] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.956928] igb: Intel(R) Gigabit Ethernet Network Driver
[ 0.962336] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.967941] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 0.974221] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.980333] sky2: driver version 1.30
[ 0.984635] usbcore: registered new interface driver r8152
[ 0.990349] VFIO - User Level meta-driver version: 0.3
[ 1.000832] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.007439] ehci-pci: EHCI PCI platform driver
[ 1.011937] ehci-platform: EHCI generic platform driver
[ 1.017383] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.023597] ohci-pci: OHCI PCI platform driver
[ 1.028085] ohci-platform: OHCI generic platform driver
[ 1.034134] usbcore: registered new interface driver uas
[ 1.039500] usbcore: registered new interface driver usb-storage
[ 1.045574] usbcore: registered new interface driver usbserial_generic
[ 1.052128] usbserial: USB Serial support registered for generic
[ 1.058168] usbcore: registered new interface driver ftdi_sio
[ 1.063937] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.071283] usbcore: registered new interface driver usb_serial_simple
[ 1.077836] usbserial: USB Serial support registered for carelink
[ 1.083946] usbserial: USB Serial support registered for zio
[ 1.089631] usbserial: USB Serial support registered for funsoft
[ 1.095662] usbserial: USB Serial support registered for flashloader
[ 1.102047] usbserial: USB Serial support registered for google
[ 1.107990] usbserial: USB Serial support registered for libtransistor
[ 1.114539] usbserial: USB Serial support registered for vivopay
[ 1.120566] usbserial: USB Serial support registered for moto_modem
[ 1.126858] usbserial: USB Serial support registered for motorola_tetra
[ 1.133491] usbserial: USB Serial support registered for novatel_gps
[ 1.139866] usbserial: USB Serial support registered for hp4x
[ 1.145637] usbserial: USB Serial support registered for suunto
[ 1.151580] usbserial: USB Serial support registered for siemens_mpi
[ 1.157969] usbcore: registered new interface driver usb_ehset_test
[ 1.168257] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc0
[ 1.174480] snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:09:45 UTC (585)
[ 1.183850] i2c_dev: i2c /dev entries driver
[ 1.192344] Bluetooth: HCI UART driver ver 2.3
[ 1.196819] Bluetooth: HCI UART protocol H4 registered
[ 1.201970] Bluetooth: HCI UART protocol BCSP registered
[ 1.207304] Bluetooth: HCI UART protocol LL registered
[ 1.212449] Bluetooth: HCI UART protocol ATH3K registered
[ 1.217873] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 1.224247] Bluetooth: HCI UART protocol Broadcom registered
[ 1.229943] Bluetooth: HCI UART protocol QCA registered
[ 1.235393] EDAC MC: ECC not enabled
[ 1.240412] sdhci: Secure Digital Host Controller Interface driver
[ 1.246615] sdhci: Copyright(c) Pierre Ossman
[ 1.251717] Synopsys Designware Multimedia Card Interface Driver
[ 1.258476] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.266312] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.273834] usbcore: registered new interface driver usbhid
[ 1.279425] usbhid: USB HID core driver
[ 1.287730] cs_system_cfg: CoreSight Configuration manager initialised
[ 1.296034] optee: probing for conduit method.
[ 1.297209] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA
[ 1.300507] optee: revision 3.10 (a991c904)
[ 1.301262] optee: dynamic shared memory is enabled
[ 1.316954] optee: initialized driver
[ 1.323636] Galcore version 6.4.3.p4.398061
[ 1.386570] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[ 1.394329] mmcblk2: mmc2:0001 DG4008 7.28 GiB
[ 1.401873] mmcblk2: p1 p2
[ 1.406410] mmcblk2boot0: mmc2:0001 DG4008 4.00 MiB
[ 1.413160] mmcblk2boot1: mmc2:0001 DG4008 4.00 MiB
[ 1.419986] mmcblk2rpmb: mmc2:0001 DG4008 4.00 MiB, chardev (234:0)
[ 1.441381] [drm] Initialized vivante 1.0.0 20170808 for 40000000.mix_gpu_ml on minor 0
[ 1.451090] hantrodec 0 : module inserted. Major = 511
[ 1.456704] hantrodec 1 : module inserted. Major = 511
[ 1.463267] hantroenc: HW at base <0000000038320000> with ID <0x80006200>
[ 1.470198] hx280enc: module inserted. Major <510>
[ 1.478003] NET: Registered PF_LLC protocol family
[ 1.483307] NET: Registered PF_INET6 protocol family
[ 1.490180] Segment Routing with IPv6
[ 1.493878] In-situ OAM (IOAM) with IPv6
[ 1.497850] NET: Registered PF_PACKET protocol family
[ 1.503607] Bluetooth: RFCOMM TTY layer initialized
[ 1.508507] Bluetooth: RFCOMM socket layer initialized
[ 1.513682] Bluetooth: RFCOMM ver 1.11
[ 1.517452] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.522770] Bluetooth: BNEP filters: protocol multicast
[ 1.528014] Bluetooth: BNEP socket layer initialized
[ 1.532983] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.538918] Bluetooth: HIDP socket layer initialized
[ 1.544578] 8021q: 802.1Q VLAN Support v1.8
[ 1.548798] lib80211: common routines for IEEE802.11 drivers
[ 1.554571] 9pnet: Installing 9P2000 support
[ 1.558883] tsn generic netlink module v1 init...
[ 1.563656] Key type dns_resolver registered
[ 1.568791] Loading compiled-in X.509 certificates
[ 1.598302] regulator-se050-en GPIO handle specifies active low - ignored
[ 1.605616] reg-fixed-voltage regulator-csi-en: nonexclusive access to GPIO for regulator-csi-en
[ 1.775644] i2c i2c-0: IMX I2C adapter registered
[ 1.781288] i2c 1-003c: Fixing up cyclic dependency with 32e40000.csi
[ 1.788025] ov5640 1-003c: supply DOVDD not found, using dummy regulator
[ 1.794839] ov5640 1-003c: supply AVDD not found, using dummy regulator
[ 1.801498] ov5640 1-003c: supply DVDD not found, using dummy regulator
[ 1.809529] ov5640 1-003c: ov5640_read_reg: error: reg=300a
[ 1.815131] ov5640 1-003c: ov5640_check_chip_id: failed to read chip identifier
[ 1.822707] i2c i2c-1: IMX I2C adapter registered
[ 1.828562] i2c 2-003c: Fixing up cyclic dependency with 32e50000.csi
[ 1.835305] ov5640 2-003c: supply DOVDD not found, using dummy regulator
[ 1.842117] ov5640 2-003c: supply AVDD not found, using dummy regulator
[ 1.848775] ov5640 2-003c: supply DVDD not found, using dummy regulator
[ 1.856340] ov5640 2-003c: ov5640_read_reg: error: reg=300a
[ 1.861948] ov5640 2-003c: ov5640_check_chip_id: failed to read chip identifier
[ 1.869506] i2c i2c-2: IMX I2C adapter registered
[ 1.875170] i2c i2c-5: IMX I2C adapter registered
[ 1.880239] imx8mq-usb-phy 381f0040.usb-phy: supply vbus not found, using dummy regulator
[ 1.888739] imx8mq-usb-phy 382f0040.usb-phy: supply vbus not found, using dummy regulator
[ 1.898999] imx6q-pcie 33800000.pcie: supply epdev_on not found, using dummy regulator
[ 1.907074] imx6q-pcie 33800000.pcie: error -ENOENT: pcie_phy clock source missing or invalid
[ 1.915711] imx6q-pcie: probe of 33800000.pcie failed with error -2
[ 1.926822] pps pps0: new PPS source ptp0
[ 1.938742] fec 30be0000.ethernet eth0: registered PHC device 0
[ 1.945510] imx-dwmac 30bf0000.ethernet: IRQ eth_lpi not found
[ 1.952246] imx-dwmac 30bf0000.ethernet: User ID: 0x10, Synopsys ID: 0x51
[ 1.959054] imx-dwmac 30bf0000.ethernet: DWMAC4/5
[ 1.963855] imx-dwmac 30bf0000.ethernet: DMA HW capability register supported
[ 1.970994] imx-dwmac 30bf0000.ethernet: RX Checksum Offload Engine supported
[ 1.978135] imx-dwmac 30bf0000.ethernet: TX Checksum insertion supported
[ 1.984840] imx-dwmac 30bf0000.ethernet: Wake-Up On Lan supported
[ 1.990991] imx-dwmac 30bf0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 1.998661] imx-dwmac 30bf0000.ethernet: device MAC address 3a:d3:7c:68:83:2e
[ 2.005813] imx-dwmac 30bf0000.ethernet: Enabled L3L4 Flow TC (entries=8)
[ 2.012612] imx-dwmac 30bf0000.ethernet: Enabled RFS Flow TC (entries=8)
[ 2.019328] imx-dwmac 30bf0000.ethernet: Enabling HW TC (entries=256, max_off=256)
[ 2.026908] imx-dwmac 30bf0000.ethernet: Using 34 bits DMA width
[ 2.038138] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 2.043663] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 2.051669] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe6d hci version 0x110 quirks 0x0000002001010010
[ 2.061118] xhci-hcd xhci-hcd.1.auto: irq 77, io mem 0x38200000
[ 2.068011] hub 1-0:1.0: USB hub found
[ 2.071789] hub 1-0:1.0: 1 port detected
[ 2.075976] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 2.081481] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 2.089155] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 2.095737] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.104593] hub 2-0:1.0: USB hub found
[ 2.108379] hub 2-0:1.0: 1 port detected
[ 2.113322] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 5 mkt segment 0 supported-hw 0x20 0x1
[ 2.124835] mxc-mipi-csi2-sam 32e40000.csi: supply mipi-phy not found, using dummy regulator
[ 2.125106] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO
[ 2.133656] : mipi_csis_imx8mp_phy_reset, No remote pad found!
[ 2.144245] mxc-mipi-csi2-sam 32e40000.csi: lanes: 2, hs_settle: 13, clk_settle: 2, wclk: 1, freq: 500000000
[ 2.155213] mxc-mipi-csi2-sam 32e50000.csi: supply mipi-phy not found, using dummy regulator
[ 2.164019] : mipi_csis_imx8mp_phy_reset, No remote pad found!
[ 2.169921] mxc-mipi-csi2-sam 32e50000.csi: lanes: 2, hs_settle: 13, clk_settle: 2, wclk: 1, freq: 266000000
[ 2.172629] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA
[ 2.181676] isi-capture 32e00000.isi:cap_device: deferring 32e00000.isi:cap_device device registration
[ 2.196978] mxc-isi 32e00000.isi: mxc_isi.0 registered successfully
[ 2.204912] isi-capture 32e02000.isi:cap_device: deferring 32e02000.isi:cap_device device registration
[ 2.214374] mxc-isi 32e02000.isi: mxc_isi.1 registered successfully
[ 2.223575] dwhdmi-imx 32fd8000.hdmi: Detected HDMI TX controller v2.13a with HDCP (samsung_dw_hdmi_phy2)
[ 2.227158] mmc1: host does not support reading read-only switch, assuming write-enable
[ 2.235103] dwhdmi-imx 32fd8000.hdmi: registered DesignWare HDMI I2C bus driver
[ 2.245092] mmc1: new high speed SDHC card at address aaaa
[ 2.252673] imx-drm display-subsystem: bound imx-lcdifv3-crtc.0 (ops lcdifv3_crtc_ops)
[ 2.255359] mmcblk1: mmc1:aaaa SA16G 14.8 GiB
[ 2.262033] imx-drm display-subsystem: bound 32fd8000.hdmi (ops dw_hdmi_imx_ops)
[ 2.270081] mmcblk1: p1 p2 p3
[ 2.274337] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1
[ 2.284752] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes
[ 2.298449] isi-m2m 32e00000.isi:m2m_device: Register m2m success for ISI.0
[ 2.305583] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.316639] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.317420] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA
[ 2.325914] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.338943] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[ 2.347091] ALSA device list:
[ 2.350072] No soundcards found.
[ 2.372674] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 2.382504] VFS: Mounted root (ext4 filesystem) readonly on device 179:99.
[ 2.398828] devtmpfs: mounted
[ 2.402506] Freeing unused kernel memory: 2944K
[ 2.407121] Run /sbin/init as init process
[ 2.551919] random: fast init done
[ 3.026354] systemd[1]: System time before build time, advancing clock.
[ 3.064706] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +
LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 3.088550] systemd[1]: Detected architecture arm64.
 
Welcome to Debian GNU/Linux 11 (bullseye)!
 
[ 3.139998] systemd[1]: Set hostname to <uefi-arm64>.
[ 3.201880] Hot alarm is canceled. GPU3D clock will return to 64/64
[ 3.609007] systemd[178]: /usr/lib/systemd/system-generators/netplan failed with exit status 1.
[ 3.880648] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it di
sables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or '
control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 4.074251] systemd[1]: Queued start job for default target Graphical Interface.
[ 4.084321] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.091166] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firew
alling.
[ 4.103793] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 4.114485] systemd[1]: Created slice system-modprobe.slice.
[ OK ] Created slice system-modprobe.slice.
[ 4.138251] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.146036] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 4.170255] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.177892] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 4.202520] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 4.226123] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[ 4.238098] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 4.262246] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 4.282260] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 4.302397] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 4.322655] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 4.346457] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 4.370839] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 4.383574] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 4.406754] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 4.434100] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 4.458673] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 4.485562] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 4.508830] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 4.532797] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 4.550883] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 4.569735] systemd[1]: Starting Restore / save the current clock...
Starting Restore / save the current clock...
[ 4.593660] systemd[1]: Starting Set the console keyboard layout...
Starting Set the console keyboard layout...
[ 4.614380] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
[ 4.629117] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 4.653138] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 4.673290] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 4.696967] systemd[1]: Started Nameserver information manager.
[ OK ] Started Nameserver information manager.
[ 4.718364] systemd[1]: Reached target Network (Pre).
[ OK ] Reached target Network (Pre).
[ 4.740455] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 4.752435] systemd[1]: Starting File System Check on Root Device...
Starting File System Check on Root Device...
[ 4.780826] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 4.789397] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 4.802600] systemd[1]: Mounted Huge Pages File System.
[ OK ] Mounted 4.808509] systemd[1]: Mounted POSIX Message Queue File System.
;39mHuge Pages File System.
[ 4.817509] systemd[1]: Mounted Kernel Debug File System.
[ OK ] Mounted 4.826614] systemd[1]: Finished Restore / save the current clock.
;39mPOSIX Message Queue File Syst[ 4.835477] systemd[1]: modprobe@configfs.service: Succeeded.
em.
[ OK ] Moun[ 4.843716] systemd[1]: Finished Load Kernel Module configfs.
ted Kernel Debug File Sy[ 4.852727] systemd[1]: modprobe@drm.service: Succeeded.
stem.
[ OK ] Fi[ 4.860517] systemd[1]: Finished Load Kernel Module drm.
nished Restore / save th[ 4.868992] systemd[1]: modprobe@fuse.service: Succeeded.
e current clock.
[ O[ 4.876953] systemd[1]: Finished Load Kernel Module fuse.
K ] Finished Load Kernel Module configfs.
[ 4.887084] systemd[1]: Finished Load Kernel Modules.
0;32m OK ] Finished 4.896628] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
9mLoad Kernel Module drm.
[ OK ] Finished 4.909507] systemd[1]: Mounting Kernel Configuration File System...
1;39mLoad Kernel Module fuse.
[ OK ] Finished [ 4.921091] systemd[1]: Started File System Check Daemon to report status.
Load Kernel Modules.
Mounting Ke[ 4.933844] systemd[1]: Starting Apply Kernel Variables...
rnel Configuration File System...
[ OK ] Start[ 4.945273] systemd[1]: Finished Set the console keyboard layout.
ed File System Check Dae[ 4.954257] systemd[1]: Mounted Kernel Configuration File System.
mon to report status.
Starting Apply Kernel Variables...
[ OK ] Finished Set the console keyboard layout.
[ OK ] Mounted Kernel Configuration File System.
[ 5.007387] systemd[1]: Finished File System Check on Root Device.
[ OK ] Finished File System Check on Root Device.
[ 5.031370] systemd[1]: Finished Apply Kernel Variables.
[ OK ] Finished Apply Kernel Variables.
[ 5.057614] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 5.256231] EXT4-fs (mmcblk1p3): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none.
[ 5.269736] systemd[1]: Finished Remount Root and Kernel File Systems.
[ OK ] Finished Remount Root and Kernel File Systems.
[ 5.300724] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 5.309390] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 5.321700] systemd[1]: Starting Load/Save Random Seed...
Starting Load/Save Random Seed...
[ 5.344978] systemd[1]: Starting Create System Users...
Starting Create System Users...
[ 5.396537] systemd[1]: Finished Create System Users.
[ OK ] Finished Create System Users.
[ 5.416013] systemd[1]: Finished Coldplug All udev Devices.
[ OK ] Finished Coldplug All udev Devices.
[ 5.443231] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
Starting Helper to synchronize boot up for ifupdown...
[ 5.468965] systemd[1]: Starting Create Static Device Nodes in /dev...
Starting Create Static Device Nodes in /dev...
[ 5.514321] systemd[1]: Finished Create Static Device Nodes in /dev.
[ OK ] Finished Create Static Device Nodes in /dev.
[ 5.542593] systemd[1]: Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems (Pre).
[ 5.570962] systemd[1]: Mounting /tmp...
Mounting /tmp...
[ 5.593042] systemd[1]: Starting Rule-based Manager for Device Events and Files...
Starting Rule-based Manage…for Device Events and Files...
[ 5.620259] systemd[1]: Mounted /tmp.
[ OK ] Mounted /tmp.
[ 5.638377] systemd[1]: Reached target Local File Systems.
[ OK ] Reached target Local File Systems.
[ 5.664910] systemd[1]: Starting Armbian leds state...
Starting Armbian leds state...
[ 5.685146] systemd[1]: Starting Armbian ZRAM config...
Starting Armbian ZRAM config...
[ 5.704707] systemd[1]: Starting Set console font and keymap...
Starting Set console font and keymap...
[ 5.724808] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
Starting Tell Plymouth To Write Out Runtime Data...
[ 5.747410] systemd[1]: Finished Set console font and keymap.
[ OK ] Finished Set console font and keymap.
[ 5.771579] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data.
[ OK ] Finished Tell Plymouth To Write Out Runtime Data.
[ 5.794462] systemd[1]: Started Rule-based Manager for Device Events and Files.
[ OK ] Started Rule-based Manager for Device Events and Files.
[ 5.819462] systemd[1]: Finished Armbian leds state.
[ OK ] Finished Armbian leds state.
[ 5.841045] systemd[1]: Starting Show Plymouth Boot Screen...
Starting Show Plymouth Boot Screen...
[ 5.885988] systemd[1]: Received SIGRTMIN+20 from PID 267 (plymouthd).
[ 5.915469] systemd[1]: Started Show Plymouth Boot Screen.
[ OK ] Started 5.922352] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsp
lash is active being skipped.
;39mShow Plymouth Boot Screen[ 5.938359] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
.
[ OK ] Started 5.949356] systemd[1]: Reached target Local Encrypted Volumes.
;39mForward Password R…s to Ply[ 5.959551] systemd[1]: Reached target Paths.
mouth Directory Watch.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target Paths.
[ 6.026527] systemd[1]: armbian-zram-config.service: Main process exited, code=exited, status=1/FAILURE
[ 6.036769] systemd[1]: armbian-zram-config.service: Failed with result 'exit-code'.
[ 6.045780] systemd[1]: Failed to start Armbian ZRAM config.
[FAILED] Failed to start Armbian ZRAM conf[ 6.055314] systemd[1]: Starting Armbian memory supported logging...
ig.
See 'systemctl status armbian-zram-config.service' for details.
Starting Armbian memory supported logging...
[ 6.265405] systemd[1]: Found device /dev/ttymxc1.
[ 6.270606] cfg80211: failed to load regulatory.db
[ OK ] Found device /dev/ttymxc1.
[ 6.421201] imx-sdma 30e10000.dma-controller: firmware found.
[ 6.421201] imx-sdma 30bd0000.dma-controller: firmware found.
[ 6.421372] imx-sdma 30bd0000.dma-controller: loaded firmware 4.5
[ 7.001399] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ OK ] Finished 7.011956] systemd[1]: Starting Raise network interfaces...
1;39mHelper to synchronize boot up for ifupdown.
Starting Raise network interfaces...
[ 7.225419] Generic PHY 30be0000.ethernet-1:08: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:08, irq=POLL)
[ 7.310724] systemd[1]: Finished Raise network interfaces.
[ OK ] Finished Raise network interfaces.
[ 7.613835] random: crng init done
[ 7.617252] random: 7 urandom warning(s) missed due to ratelimiting
[ 7.648331] systemd[1]: Finished Load/Save Random Seed.
[ OK ] Finished 7.654340] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[ 7.664986] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
root@uefi[ 7.677519] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.[ 8.607137] systemd[1]: Finished Armbian memory supported logging.[ OK ] Finished Armbian memory supported l[ 8.616777] systemd[1]: Starting Journal Service...ogging. Starting Journal Service...[ 8.813254] systemd[1]: Started Journal Service.[ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage...[ 8.851136] systemd-arm64journald[422]:~# cat Received client request to flush runtime journal.[ OK ] Finished Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories...[ OK ] Finished Create Volatile Files and Directories.[ OK ] Started Entropy Daemon based on the HAVEGE algorithm. Starting Update UTMP about System Boot/etcShutdown...[ OK ] Finished Update UTMP about System Boot/Shutdown.[ OK ] Reached target System Initialization.[ OK ] Started Daily apt download activities.[ OK ] Started Daily apt upgrade and clean activities.[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.[ OK ] Started Discard unused blocks once a week.[ OK ] Started Daily rotation of log files.[ OK ] Started Clean PHP session files every 30 mins.[ OK ] Started Run system activit…ounting tool every 10 minutes.[ OK ] Started Generate summary o…esterday's process accounting.[ OK ] Started Daily Cleanup of Temporary Directories.[ OK ] Reached target Timers.[ OK ] Listening on D-Bus System Message Bus Socket.[ OK ] Reached target Sockets. Starting Armbian hardware monitoring... Starting Armbian hardware optimization...[ OK ] Finished Armbian hardware monitoring.[ OK ] Finished Armbian hardware optimization.[ OK ] Reached target Basic System.[ OK ] Started Armbian first run tasks.[ OK ] Created slice system-getty.slice.[ OK ] Started Regular background program processing daemon.[ OK ] Started D-Bus System Message Bus. Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting LSB: Load kernel …d to enable cpufreq scaling... Starting System Logging Service... Starting Resets System Activity Logs... Starting User Login Management... Starting WPA supplicant...[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.[ 9.283020] fec 30be0000.ethernet eth0: Link is Up - 100Mbps/networkFull - flow control rx/interfacestx[ 9.291303] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready[ OK ] Finished Resets System Activity Logs.[ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling. Starting LSB: set CPUFreq kernel parameters...source [ OK ] Started System Logging Service.[ OK ] Started LSB: set CPUFreq kernel parameters. Starting LSB: Set sysfs variables from /etc/network/interfacessysfs.conf...[ OK ] Started User Login Management.[ OK ] Started WPA supplicant.[ OK ] Reached target Network.d/*# [ OK ] Reached target Network is managed by Online. Starting LSB: Advanced IEEE 802.11 management daemon... Starting Network managerTime Service...# auto lo Starting OpenVPN service...# iface lo inet loopback Starting /etc/rc.local Compatibility... Starting OpenBSD Secure Shell server... Starting Permit User Sessions...[ 9.710449] systemd-journald[422]: Received client request to relinquish /var/log/journal/9d4683f3346a494aa37ca5176b1495aa access.[ OK ] Started LSB: Advanced IEEE 802.11 management daemon.[ OK ] Finished OpenVPN service.[ OK ] Started /etc/rc.local Compatibility.[ OK ] Finished Permit User Sessions. Starting Hold until boot process finishes up... Starting Terminate Plymouth Boot Screen...
auto eth0iface eth0 inet static address 192Armbian 22.168.0.81 netmask 255.255.255.0 gateway 192.168.0.254root@uefi-arm64:~# cat /etc/resolv.conf#nameserver 1.0.011.1Bullseye ttymxc1
domain localdomainsearch localdomainuefi-arm64 login: [ 21.520671] systemd-journald[422]: Received client request to flush runtime journal.nameserver 8.8[ 21.8589388] systemd-journald[422]: Received client request to relinquish /var/log/journal/9d4683f3346a494aa37ca5176b1495aa access.8
==Bootstrap process==uefi-arm64 login: rootPassword: _ _ _____ _____ ___ __ _ _ | | | | ____| ___|_ _| __ _ _ __ _ __ ___ / /_ | || | | | | | _| | |_ | | / _` | '__| '_ ` _ \| '_ \| || |_ | |_| | |___| _| | | | (_| | | | | | | | | (_) |__ _| \___/|_____|_| |___| \__,_|_| |_| |_| |_|\___/ |_| Welcome to Armbian 22.11.4 Bullseye with Linux 5.15.32-00007-gfe10aa07dfca-dirty System load: 21% Up time: 1 min Memory usage: 6% of 5.47G IP: 192.168.0.81CPU temp: 47°C Usage of /: 41% of 9.2G  [ Menu-driven system configuration (beta): sudo apt update && sudo apt install armbian-config ] root@uefi-arm64:~#
4,650
edits