3,260
edits
Changes
→Bootstrap settings
# NAND
# NANDI2C.
This confoiguration canbe changed by acting on S5 dip switch on bottom side of the board. Swithes allow to configure each BTMODE signal independently as summarized by following table.
{| class="wikitable" !NELK version
|-
|Switch position
|BTMODE
|-
|S5.1 off
|default
|-
|S5.1 on
|BTMODE0=1
|-
|S5.2 off
|default
|-
|S5.2 on
|RFU
|-
|S5.2 off
|
|-
|S5.2 off
|5.03 (December 2011)
|}