NELK Release Notes

Info Box Applies to Naon Applies to NaonEVB-Lite Applies to NaonEVB-Mid

Naon Embedded Linux Kit (NELK) Release Notes

Rel. 1.0.0

• Release date: May 2012
• Status: obsolete
• EZSDK version: 5.03
• Supported carrier boards: NaonEVB-Lite only

Notes

• Initial release

Rel. 2.0.0

• Release date: September 2012
• Status: released only as Release Candidate version
• EZSDK version: 5.04
• Supported carrier boards: NaonEVB-Lite, NaonEVB-Mid

Notes

• Added support for NaonEVB-Mid
• Added support for the following interfaces/features
  • Nand 8-bit
  • USB Host
  • USB OTG (NaonEVB-Mid only)
  • Video Input port VIN0 (NaonEVB-Mid only)

Notes on U-Boot bootloader

• Added Marvell Phy Gigabit support in U-Boot ver 2.0.0
• New env variables select the primary phy and link speed negotiation:

cpsw [0|1] : if present, select primary phy for networking operations in uboot

                  0 = phy 6 -> 100Mbit Naon module

                  1 = phy 1 -> 1Gbit external, EVB-Lite and EVB-Mid

giga [on] : if present, select gigabit speed on gigabit link, if not present speed link is default 100Mbit

NELK 2.0.0 package list

Please refer to NELK 2.0.0 root file system package list (NAON).

Rel. 3.0.0

• Release date: December 2012
• Status: released
• EZSDK version: 5.05
• Supported carrier boards: NaonEVB-Lite, NaonEVB-Mid

Notes

• Added support for the following interfaces/features
  • Video Input port VIN1 (additional host required)
  • SATA
  • Suspend to RAM
  • OPP Support
  • DWM (Wireless add-on module) on SDIO (NaonEVB-Lite only)