3,260
edits
Changes
m
→Notes
{{InfoBoxTop}}
{{AppliesToNaonAppliesToNaonFamily}}
{{Applies To NaonEVB-Lite}}
{{Applies To NaonEVB-Mid}}
=Naon Embedded Linux Kit (NELK) Release Notes=
{{ImportantMessage|text=HotFixes are modification introduced to software components (u-boot, kernel, ...) after a major NELK release. Customers can keep their source trees in sync and up to date with '''DAVE Embeddded Systems''' repositories using GIT, as described in [[How_to_update_NELK#Synchronizing_the_repository | Synchronizing_the_repository]]}}
== Rel. 4.1.1 ==
* Release date: March 2014
* Status: released
* EZSDK version: 5.05.02.00
* Supported carrier boards: NaonEVB-Lite, NaonEVB-Mid
=== Notes ===
* Maintenance release
==== HotFix list ====
===== U-Boot =====
* Enable Maya module ID pins as GPIO
* Fixed MT47H64M16HR timings
* Fixed NAND protocol issue with Spansion chip
* Cleanup DDR2/3 initialization
===== Kernel =====
* Updated Naon and Dido defconfigs
* Fixed UART3/UART5 clock issue
* Fixed NAND protocol issue with Spansion chip
== Rel. 4.0.0 ==
* Release date: April 2013
* Status: plannedreleased
* EZSDK version: 5.05.02.00
* Supported carrier boards: NaonEVB-Lite, NaonEVB-Mid
** PMIC RTC (battery powered)
** /proc/ti81xx_cpuinfo entry
** passing Passing the mac address from u-boot to Linux kernel (command line parameters : eth0=xx:xx:xx:xx:xx:xx eth1=xx:xx:xx:xx:xx:xx)** dido Updated Memory Map** Dido 2GiB RAM** driver PCI Express on Dido** CPSW mode selection (dual emac mode vs switch mode at runtime) on u-boot ==== HotFix list ==== ===== U-Boot =====* 4.0.1** TPS65910 IRQ GPIO mux configured correctly for the whole Naon family * 4.0.2** Fix Warm and WDT Reset. When a Warm or WDT Reset is asserted, subsystems are not correctly reset, leading to malfunctioning (eg: HDVPSS firmware_load hangs). The fix introduces a cold reset when a Warm or WDT reset is recognized in 1st stage ===== Kernel ===== * 4.0.1** Fix SPI NOR flash addressing** Fix TPS65911 panic on suspend * 4.0.2** [[NELK_Power_Management#Standby_Support | Gate a clock]] when user chooses zero (0) as clock frequency
== Rel. 3.0.0 ==
