Difference between revisions of "NELK Release Notes"
DevWikiAdmin (talk | contribs) (→Notes) |
DevWikiAdmin (talk | contribs) (→Notes) |
||
| Line 17: | Line 17: | ||
* Initial release | * Initial release | ||
| + | * Supported interfaces: | ||
| + | ** SPI NOR Flash (boot) | ||
| + | ** EEPROM | ||
| + | ** Keypad controller | ||
| + | ** Touch screen controller | ||
| + | ** ADC | ||
| + | ** EMAC0 RMII (Fast Ethernet) | ||
| + | ** EMAC1 RGMII (Gigabit Ethernet) | ||
| + | ** SD/MMC1 | ||
| + | ** Video Output port VOUT0 (24 bit) | ||
| + | ** UART0 (2-wire) | ||
| + | ** SPI0 (boot flash) | ||
| + | ** I2C0 | ||
| + | ** I2C1 (DDC HDMI) | ||
| + | ** I2C2 | ||
| + | ** HDMI | ||
| + | ** GPIO | ||
| + | ** SGX 3D accelerator | ||
| + | ** HDVICP2 codec engine | ||
== Rel. 2.0.0 == | == Rel. 2.0.0 == | ||
Revision as of 11:08, 22 November 2012
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Contents
Naon Embedded Linux Kit (NELK) Release Notes[edit | edit source]
Rel. 1.0.0[edit | edit source]
- Release date: May 2012
- Status: obsolete
- EZSDK version: 5.03
- Supported carrier boards: NaonEVB-Lite only
Notes[edit | edit source]
- Initial release
- Supported interfaces:
- SPI NOR Flash (boot)
- EEPROM
- Keypad controller
- Touch screen controller
- ADC
- EMAC0 RMII (Fast Ethernet)
- EMAC1 RGMII (Gigabit Ethernet)
- SD/MMC1
- Video Output port VOUT0 (24 bit)
- UART0 (2-wire)
- SPI0 (boot flash)
- I2C0
- I2C1 (DDC HDMI)
- I2C2
- HDMI
- GPIO
- SGX 3D accelerator
- HDVICP2 codec engine
Rel. 2.0.0[edit | edit source]
- Release date: September 2012
- Status: released only as Release Candidate version
- EZSDK version: 5.04
- Supported carrier boards: NaonEVB-Lite, NaonEVB-Mid
Notes[edit | edit source]
- Added support for NaonEVB-Mid
- Added support for the following interfaces/features
- Nand 8-bit
- USB Host
- USB OTG (NaonEVB-Mid only)
- Video Input port VIN0 (NaonEVB-Mid only)
- Extended root file system with Angstrom repository (see below)
Notes on U-Boot bootloader[edit | edit source]
- Added Marvell Phy Gigabit support in U-Boot ver 2.0.0
- New env variables select the primary phy and link speed negotiation:
cpsw [0|1] : if present, select primary phy for networking operations in uboot
0 = phy 6 -> 100Mbit Naon module
1 = phy 1 -> 1Gbit external, EVB-Lite and EVB-Mid
giga [on] : if present, select gigabit speed on gigabit link, if not present speed link is default 100Mbit
NELK 2.0.0 root file system package list[edit | edit source]
The root file system provided with this release has been extended using opkg and the Angstrom repositories (see Uses_cases_with_Naon_Embedded_Linux_Kit#Extending_the_root_file_system for more information). Please refer to NELK 2.0.0 root file system package list (NAON) for a full list of the installed packages.
Rel. 3.0.0[edit | edit source]
- Release date: December 2012
- Status: released
- EZSDK version: 5.05
- Supported carrier boards: NaonEVB-Lite, NaonEVB-Mid
Notes[edit | edit source]
- Added support for the following interfaces/features
- Video Input port VIN1 (additional host required)
- SATA
- Suspend to RAM
- OPP Support
- DWM (Wireless add-on module) on SDIO (NaonEVB-Lite only)
