This chapter contains the connectors and pinout description of the MITO 8M module. All interface signals that MITO 8M provides are routed through the following connectors:* 1 x 204 pins SO-DIMM edge connector with interfaces signals (named J1)** partially compatible with [[AXEL Lite SOM]]* 2 x 25 pins One Piece mating board layout Expansion (named J4 and J5)The dedicated carrier board must mount the mating connector and connect the desired peripheral interfaces according to MITO 8M pinout specifications.  Below a detailed description of the pinout, grouped in the following tables:* two tables (odd ODD and even EVEN pins) that report the pin mapping of the 204-pin SO-DIMM MITO 8M edge* a dedicated tables for J4 one-piece connector* a dedicated tables for J5 one-piece connector.