MITO 8M Nano SOM/MITO 8M Nano Evaluation Kit/Interfaces and Connectors/Power Supply
< MITO 8M Nano SOM | MITO 8M Nano Evaluation Kit| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | May 2022 | First release | |
Contents
Power SupplyEdit
DescriptionEdit
Power is provided through the J2 connector. Power voltage range is +[12-24 V].
J2 is a two pins MSTBA 2.5/2-G-5.08 Phoenix connector.
SignalsEdit
The following table describes the interface signals:
| Pin# | Pin function | Pin Notes |
|---|---|---|
| 1 | DGND | Ground |
| 2 | VIN | +[12-24 V] |
Power LEDEdit
DL1 is a green LED (placed near battery holder) shows the status of the power input. This LED is ON when a valid power supply is present.