MITO 8M Nano SOM/MITO 8M Nano Evaluation Kit/Interfaces and Connectors/JTAG

From DAVE Developer's Wiki
< MITO 8M Nano SOM‎ | MITO 8M Nano Evaluation Kit
Revision as of 13:45, 10 May 2022 by U0007 (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
History
Version Issue Date Notes
1.0.0 May 2022 First release



On board JTAG connector[edit | edit source]

JTAG signals are routed to a dedicated connector on the MITO 8M Mini/Nano PCB.

The connector is placed on the top side of the PCB, at the upper-right corner (please see the picture below).

MITO 8M MINI-jtag-conn.png

J7 - SOM Connector's pinout[edit | edit source]

J7 footprint mates with Samtec FSI-110-03-G-S connector. The following table reports the connector's pinout:

JTAG connector
Pin# Pin name Function ARM-20 JTAG Notes
1 DGND - 4,6,8,10,12,14,16,18,20 For example documented on Lauterbach specification
2 JTAG_TCK - 9 -
3 JTAG_TMS - 7 10K pull-up to 3V3 (BOARD_PGOOD driven signal)
4 JTAG_TDO - 13 10K pull-up to 3V3 (BOARD_PGOOD driven signal)
5 JTAG_TDI - 5 10K pull-up to 3V3 (BOARD_PGOOD driven signal)
6 JTAG_nTRST - 3 (*) 10K pull-up to 3V3 (BOARD_PGOOD driven signal)
7 CPU_PORn - 15 (*) -
8 N.C. - -
9 N.C. - -
10 JTAG_VREF - 1 3V3 (BOARD_PGOOD driven signal)

(*) keep the possibility to be unconnected

JD1 - EVB Connector's pinout[edit | edit source]

JD1 is a 10x1x2.54mm pinhole header. The following table reports the connector's pinout:

EVB JTAG connector
Pin# Pin name Function Notes
1 DGND -
2 JTAG_TCK - -
3 JTAG_TMS - 10K pull-up to 3V3 (BOARD_PGOOD driven signal)
4 JTAG_TDO - 10K pull-up to 3V3 (BOARD_PGOOD driven signal)
5 JTAG_TDI - 10K pull-up to 3V3 (BOARD_PGOOD driven signal)
6 JTAG_nTRST - 10K pull-up to 3V3 (BOARD_PGOOD driven signal)
7 JTAG_nRST - -
8 N.C. - -
9 N.C. - -
10 JTAG_VREF -