MITO 8M Nano SOM/MITO 8M Nano Evaluation Kit/Interfaces and Connectors/JTAG
< MITO 8M Nano SOM | MITO 8M Nano Evaluation Kit
Revision as of 13:05, 4 May 2022 by U0007 (talk | contribs) (Created page with "{{#lst:MITO_8M_Mini_SOM/MITO_8M_Mini_Evaluation_Kit/Interfaces_and_Connectors/JTAG}}")
History | |||
---|---|---|---|
Version | Issue Date | Notes | |
1.0.0 | Apr 2022 | First release |
On board JTAG connector[edit | edit source]
JTAG signals are routed to a dedicated connector on the MITO 8M Mini/Nano PCB.
The connector is placed on the top side of the PCB, at the upper-right corner (please see the picture below).
J7 - SOM Connector's pinout[edit | edit source]
J7 footprint mates with Samtec FSI-110-03-G-S connector. The following table reports the connector's pinout:
Pin# | Pin name | Function | ARM-20 JTAG | Notes |
---|---|---|---|---|
1 | DGND | - | 4,6,8,10,12,14,16,18,20 | For example documented on Lauterbach specification |
2 | JTAG_TCK | - | 9 | - |
3 | JTAG_TMS | - | 7 | 10K pull-up to 3V3 (BOARD_PGOOD driven signal) |
4 | JTAG_TDO | - | 13 | 10K pull-up to 3V3 (BOARD_PGOOD driven signal) |
5 | JTAG_TDI | - | 5 | 10K pull-up to 3V3 (BOARD_PGOOD driven signal) |
6 | JTAG_nTRST | - | 3 (*) | 10K pull-up to 3V3 (BOARD_PGOOD driven signal) |
7 | CPU_PORn | - | 15 (*) | - |
8 | N.C. | - | - | |
9 | N.C. | - | - | |
10 | JTAG_VREF | - | 1 | 3V3 (BOARD_PGOOD driven signal) |
(*) keep the possibility to be unconnected
JD1 - EVB Connector's pinout[edit | edit source]
JD1 is a 10x1x2.54mm pinhole header. The following table reports the connector's pinout:
Pin# | Pin name | Function | Notes |
---|---|---|---|
1 | DGND | - | |
2 | JTAG_TCK | - | - |
3 | JTAG_TMS | - | 10K pull-up to 3V3 (BOARD_PGOOD driven signal) |
4 | JTAG_TDO | - | 10K pull-up to 3V3 (BOARD_PGOOD driven signal) |
5 | JTAG_TDI | - | 10K pull-up to 3V3 (BOARD_PGOOD driven signal) |
6 | JTAG_nTRST | - | 10K pull-up to 3V3 (BOARD_PGOOD driven signal) |
7 | JTAG_nRST | - | - |
8 | N.C. | - | - |
9 | N.C. | - | - |
10 | JTAG_VREF | - |