Difference between revisions of "MITO 8M Mini SOM/MITO 8M Mini Hardware/Power and Reset/JTAG"
(→J7 - Connector's pinout) |
(→J7 - Connector's pinout) |
||
| Line 42: | Line 42: | ||
|3 ||NC|| - || | |3 ||NC|| - || | ||
|- | |- | ||
| − | |4 ||JTAG_TCK|| - ||internal pull- | + | |4 ||JTAG_TCK|| - ||internal pull-down 10k to DGND |
|- | |- | ||
|5 ||JTAG_TMS|| - || | |5 ||JTAG_TMS|| - || | ||
| Line 52: | Line 52: | ||
|8 ||JTAG_nTRST|| - || | |8 ||JTAG_nTRST|| - || | ||
|- | |- | ||
| − | |9 ||CPU_PORn|| - ||internal pull-up 100k to | + | |9 ||CPU_PORn|| - ||internal pull-up 100k to NVCC_SNVS_1V8 |
|- | |- | ||
| − | |10 ||NVCC_3V3|| - ||reference voltage for JTAG signals | + | |10 ||NVCC_3V3|| - ||reference voltage for JTAG signals 3.3V |
|- | |- | ||
|} | |} | ||
Revision as of 15:34, 27 January 2021
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Dec 2020 | First release | |
On board JTAG connector[edit | edit source]
JTAG signals are routed to a dedicated connector on the MITO 8M Mini/Nano PCB.
The connector is placed on the top side of the PCB, on the right side (please see the picture below).
J7 - Connector's pinout[edit | edit source]
J7 footprint mates with Samtec FSI-110-03-G-S connector. The following table reports the connector's pinout:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | DGND | - | |
| 2 | EEPROM_WP | - | |
| 3 | NC | - | |
| 4 | JTAG_TCK | - | internal pull-down 10k to DGND |
| 5 | JTAG_TMS | - | |
| 6 | JTAG_TDO | - | |
| 7 | JTAG_TDI | - | |
| 8 | JTAG_nTRST | - | |
| 9 | CPU_PORn | - | internal pull-up 100k to NVCC_SNVS_1V8 |
| 10 | NVCC_3V3 | - | reference voltage for JTAG signals 3.3V |
