3,260
edits
Changes
m
no edit summary
{{InfoBoxTop}}
{{Applies To Maya}}
{{InfoBoxBottom}}
==Introduction==
This page provides useful information and resources to system designers in order to integrate Naon module in his/her application quickly.
==Hardware==
===Evaluation boards and reference designs===
Several schematics are available in order to accelerate the design of carrier board hosting Maya SOM. Please note that, even if these schematics are derived from tested real-world applications, they are provided "as is" and they might be modified in order to adapt to your specific application.
Available schematics:
* MayaEVB-Lite: [[MayaEVB-Lite#Schematics]]
===Carrier board design guidelines===
[[Carrier board design guidelines (SOM)|This page]] provides general guidelines about how to implement carrier boards hosting SOM.
==== PCB ====
* Matching depends from Pixel Clock. As general rule, match lines at 500-800 mils
* Place Consider placing series terminator terminations near Maya Connector
=== VIN Interface ===
==== PCB ====
* Matching depends from Pixel Clock. As general rule, match lines at 500-800 mils
* Place Consider placing series terminator terminations near VIN source
=== RMII Interface ===
==== Schematic ====
* use a standard RMII PHY device that support 50MHz Clock input mode
* Set PHY address different from integrated PHY