The [[Logical_structure_of_Bora_and_BoraX_Embedded_Linux_Kits_(<section begin=BELK/BXELK)|>== Host setup and development flow==The software development flow]] environment for Bora and BoraX requires the use of Processing Subsystem (PS) is quite complex because it is based on several tools on the host side. This document collects several the resources , available in this wiki, which are related to these tools, in order to illustrate how to install and set up these toolsthem.

First, '''it is strongly recommended the reading of [[BORA_SOM/BELK-L/General/Logical_structure_of_BELK|this document]] to understand the general structure of the kit'''. For setting up the development environment, please refer to the following documents:*Please first refer to [[BORA_SOM/BELK-L/Development/Introduction_to_the_development_environment | Introduction to developing the development environment (BELK/BXELK)|this document]] to have which provides an overview of it*Then, refer to [[Build system (BORA_SOM/BELK-L/Development/BXELK)Build_system |this addressBuild system]] for operational instructions.

*[[Building UBORA_SOM/BELK-L/Development/Building_U-Boot (BELK/BXELK)|This page]] for detailed instruction on U-Boot building*[[Building Linux kernel (BORA_SOM/BELK-L/Development/BXELK)Building_Linux_kernel|This page]] for detailed instruction on Linux kernel building*[[Advanced_use_of_Yocto_build_system_(BORA_SOM/BELK-L/Development/BXELK)Advanced_use_of_Yocto_build_system|This link]] shows hot to use Yocto build system to build the entire BSP, including U-Boot bootloader, Linux kernel and root file system.

About Programmable Logic (PL), please refer to [[Creating_and_building_example_Vivado_project_(BORA_SOM/BELK-L/BXELK)Development/Creating_and_building_a_Vivado_example|this page]] that illustrates a simple reference design for BoraEVB [[BORA_SOM/BORA_Evaluation_Kit | BORA Evaluation kit]] and BoraXEVB[[BORA_Xpress_SOM/BORA_Xpress_Evaluation_Kit | BORA Xpress Evaluation kit]].<section end=BELK/>