<section begin="History" />

!colspan="4" style="width:100%; text-align:left"; border-bottom:solid 2px #ededed"|History

!style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#73B2C7; padding:5px; color:white"|Version!style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#73B2C7; padding:5px; color:white"|Issue Date!style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#73B2C7; padding:5px; color:white"|Notes

|style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#edf8fb; padding:5px; color:#000000"|X1.Y0.Z0|style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#edf8fb; padding:5px; color:#000000"|Month YearDec 2020|style="border-left:solid 2px #73B2C7; border-right:solid 2px #73B2C7;border-top:solid 2px #73B2C7; border-bottom:solid 2px #73B2C7; background-color:#edf8fb; padding:5px; color:#000000"|TBDFirst Release

<section end="History" /><section begin="Body" />

The Ethernet interface available on the Evaluation Kit at the connector ''TBD:Jxxx''J5.

''Jxx'' J5 is a ''TBD:standard RJ45 connectorconnected to the SOM integrated ethernet controller and PHY. J6 and J7 connectors are pin-to-type'' header connector pin compatible mounting options for the RS232 two-wires UART3 port, used for debug purposes (bootloader and operating system serial console)same interface.

! latexfontsize="scriptsize"| Pin#! latexfontsize="scriptsize"| SOM Pin#! latexfontsize="scriptsize"| Pin name! latexfontsize="scriptsize"| Pin function! latexfontsize="scriptsize"| Pin Notes

|1,2,4,6,,7,8,103| -J18.19| N.A.ETH_TX_P| N.C.Transmit data +| Not connected

| 35| J1J18.18921| RS232_RXETH_TX_M| Receive lineTransmit data -

| 36| J1J18.18723| RS232_TXETH_RX_P| Transmit lineReceive data +

| 98| -J18.25| DGNDETH_RX_M| GroundReceive data -

UART3 This network interface is mapped to at <code>/dev/ttymxc2eth0</code> device in Linux. The peripheral is used as the default serial console, both for the bootloader and the kernel.

To connect to The peripheral is used the debug serial port: # connect the DB9 adapter bracket to the J22 connector on the SBCX board# connect a serial cable between DB9 connector standard kernel interface and PC COM port through a NULL-modem cable (not provided)# start your favorite terminal emulator software on PC (eg: PuTTY); communication parameters are: 115200,N,8,1network protocol stack.