ETRA SOM/ETRA Evaluation Kit/General Information/Block Diagram and Features
< ETRA SOM | ETRA Evaluation Kit
Revision as of 09:18, 10 September 2021 by U0007 (talk | contribs) (→Electrical, Mechanical and Environmental Specifications)
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Dec 2020 | First Release | |
Contents
Block diagram[edit | edit source]
The following picture shows a simplified block diagram of the ETRA SOM Evaluation kit.
Main functional subsystems and interfaces are depicted.
The heart of the Evaluation Kit is the ETRA SOM module: please refer to the following Product Highlights page for the Evaluation Kit product highlights information.
Here below a summary for the main characteristics of the Kit.
Features Summary[edit | edit source]
| Feature | Specifications |
|---|---|
| Supported SOM | integrated on carrier board |
| Serial Ports | 2x UART RS232/RS485 1x LVTTL UART on pin strip (debug port) |
| Connectivity | 1x 10/100TX Ethernet on RJ45 connector DWM Wireless module (optional) |
| Display | WIDE™ display interface
2 lane MIPI interface |
| Storage | 1x microSD slot
1x eMMC on board device (optional) |
| USB | 1x USB 2.0 Host port 1x USB OTG port |
| Miscellaneous | Capacitive touchscreen connector GPIOs ADCS DACs user LED and Buttons (optional) |
Electrical, Mechanical and Environmental Specifications[edit | edit source]
| Electrical / Mechanicals | Specifications |
|---|---|
| Supply voltage | + [12 - 24] V or +5V from USB OTG port |
| Dimensions | 86 mm x 68 mm |
| Weight | TBD g |
| Operating Temperature | -5/+65 °C |
