Difference between revisions of "EEPROM (BoraLite)"

From DAVE Developer's Wiki
Jump to: navigation, search
(Created page with "{{InfoBoxTop}} {{Applies To BoraLite}} {{InfoBoxBottom}} An on-board Microchip 24AA32AT device provides an added storage device for factory settings: * the first 32 bytes of...")
 
 
Line 9: Line 9:
 
The device has some configuration pins:
 
The device has some configuration pins:
 
* three address pins for configuring the I2C adddress A0, A1, A2 internally configured as A[0..2]='000'
 
* three address pins for configuring the I2C adddress A0, A1, A2 internally configured as A[0..2]='000'
* the EEPROM_WP is connected to J2.9 pin and '''should not be externally connected'''
+
* the EEPROM_WP is connected to J2.9 pin on the [[On_board_JTAG_connector_(BoraLite) | JTAG connector]] and '''should not be externally connected'''

Latest revision as of 06:40, 18 October 2019

Info Box
BORALite-TOP.png Applies to BORA Lite

An on-board Microchip 24AA32AT device provides an added storage device for factory settings:

  • the first 32 bytes of the device are RESERVED: this region stores the bytes for the ConfigID on BORA Lite SOMs configured for booting from NAND device (without NOR SPI on board)
  • the device is write protected using the EEPROM_WP

The device has some configuration pins:

  • three address pins for configuring the I2C adddress A0, A1, A2 internally configured as A[0..2]='000'
  • the EEPROM_WP is connected to J2.9 pin on the JTAG connector and should not be externally connected