Difference between revisions of "EEPROM (BoraLite)"
(Created page with "{{InfoBoxTop}} {{Applies To BoraLite}} {{InfoBoxBottom}} An on-board Microchip 24AA32AT device provides an added storage device for factory settings: * the first 32 bytes of...") |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 2: | Line 2: | ||
{{Applies To BoraLite}} | {{Applies To BoraLite}} | ||
{{InfoBoxBottom}} | {{InfoBoxBottom}} | ||
| + | |||
| + | {{ObsoleteWikiPage|link=BORA Lite SOM}} | ||
An on-board Microchip 24AA32AT device provides an added storage device for factory settings: | An on-board Microchip 24AA32AT device provides an added storage device for factory settings: | ||
| Line 9: | Line 11: | ||
The device has some configuration pins: | The device has some configuration pins: | ||
* three address pins for configuring the I2C adddress A0, A1, A2 internally configured as A[0..2]='000' | * three address pins for configuring the I2C adddress A0, A1, A2 internally configured as A[0..2]='000' | ||
| − | * the EEPROM_WP is connected to J2.9 pin and '''should not be externally connected''' | + | * the EEPROM_WP is connected to J2.9 pin on the [[On_board_JTAG_connector_(BoraLite) | JTAG connector]] and '''should not be externally connected''' |
Latest revision as of 08:20, 18 July 2023
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
|
THIS PAGE IS OBSOLETE, DON'T USE IT AS REFERENCE |
| The new documentation is available here: BORA Lite SOM | |
An on-board Microchip 24AA32AT device provides an added storage device for factory settings:
- the first 32 bytes of the device are RESERVED: this region stores the bytes for the ConfigID on BORA Lite SOMs configured for booting from NAND device (without NOR SPI on board)
- the device is write protected using the EEPROM_WP
The device has some configuration pins:
- three address pins for configuring the I2C adddress A0, A1, A2 internally configured as A[0..2]='000'
- the EEPROM_WP is connected to J2.9 pin on the JTAG connector and should not be externally connected
