Changes

Jump to: navigation, search

Dacu for the Diva SOM

2,190 bytes added, 15:30, 9 August 2013
m
no edit summary
{{WorkInProgress}}
{{InfoBoxTop}}
{{AppliesToDacu}}
{{Applies To Diva}}
{{InfoBoxBottom}}
 
==Introduction==
When used in combinaton with [[:Category:Diva|Diva SOM]], DACU requires the use of [[DivaEVB-Lite]] acting as adaptation board. The overall system looks like the following picture and it is composed by
 
* Diva SOM
* DivaEVB-Lite
* Dacu carrier board.
 
[[File:Diva divaevb dacu.png|600px]]
 
In order to make DACU compatible with this configuration, some additional wired connections are required, as detailed in the [[Dacu#Schematics|schematics]]. The following sections explains in more detail these issues.
 
=== Block diagram ===
 
The following figure shows the system block diagram:
 
[[File:Dacu-diva-block diagram.png|600px]]
 
==Power supply==
This is the power-up sequence of the whole system (it matches [[Hardware_Manual_%28Diva%29#Power.2C_reset_and_control|Diva recommended power-up sequence]]):
# power supply or wall adapter connected to DACU's JP2 is turned on
# DACU's U15 DC/DC PSU is turned on; since the output of this DC/DC is connected to DivaEVB-Lite's VREG rail, Diva SOM is powered
# Diva performs its own power-on sequence
# DivaEVB-Lite's U4 linear regulator is enabled by Diva
# DivaEVB-Lite's 3.3V rail raises; since this rail is connected to DACU's ENA_3.3V, DACU's U16 DC/DC PSU is enabled and DACU's circuitry interfacing processor's I/O is powered
==DACU's USB host port==
DACU's USB host port power is controlled by Micrel MIC2026 Dual-Channel Power Distribution Switch (U7). B channel of this swith is associated to USB host port. In order to control this channel, Diva's USB1_DRVVBUS and VUSB_VBUS1 signals are connected to ENB and FLGB pads respectively.
 
== Schematics ==
{{ImportantMessage|text=Please note that Orcad CIS is required to get all the information about BOM variants included in .dsn files.
 
PDF files show the view of the default BOM variant used to manufacture the board. Components that are not populated are denoted as "Do Not Stuff".}}
* Orcad: http://www.dave.eu/system/files/area-riservata/dacu-DACUEVB_2.0.2-dsn.zip
* PDF: http://www.dave.eu/system/files/area-riservata/dacu_S.DACUD000I2R.2.0.2.pdf
 
==BOM==
* http://www.dave.eu/system/files/area-riservata/dacu_BOM_S.DACUD000I2R.2.0.2.csv_.zip

Navigation menu