3,260
edits
Changes
Dacu
,no edit summary
The following picture shows block diagram of Dacu:
[[File:dacu-bd.jpg|thumbnail|center]]
===Quick start===
This section describes how to quick start Dacu system.
# connect the serial cable, provided with the board, to
# connect this cable to PC COM port through a NULL-modem cable (not provided)
# start your favourite terminal software on PC; communication parameters are:
#* baud rate: 115200 Bps
#* data bits: 8
#* stop bits: 1
#* parity: none
# (optional) to connect the system to Ethernet LAN, please plug cable on connector
# (optional) to connect the system to HDMI TV/LCD, please plug cable on connector
# connect a 12Vcc power supply to
Once power has been applied, U-Boot bootloader will be executed and the following messages will be printed on serial console (please note that messages may vary due different U-Boot releases)