| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| First DESK-MX6-L release | |||
| 2022/03/16 | DESK-MX6-L 3.0.0 release | ||
Contents
How to configure the network interfacesEdit
For deploying an Embedded System, one of the most important configuration is the Network Interface configuration.
Once the Embedded Device is finally configured for stand-alone bootstrap, the network interface should be configured for reaching the device remotely via network connections like ssh, telnet, ftp, http, etc.
This Application Note briefly describes how it is possible to simply configure the network interfaces on systemd
ResourcesEdit
For further details on network configuration, please refer - for example - to:
ExamplesEdit
The following configuration assumptions are used in the paragraphs shown below:
- IP address range of the LAN network 192.168.1.0 - 192.168.1.255
- IP address of the gateway 192.168.1.254
- IP address of the device 192.168.1.100
systemdEdit
The network configuration for systemd are basically found in the /etc/systemd/network/ directory.
The most simply way for configuring the network interface is to create/edit the file /etc/systemd/network/20-eth0.network as per the following paragraphs.
For more example and usage hints on systemd, please refer to our wiki page.
Static IP addressEdit
[Match] Name=eth0 # Prevent the interface loading if the kernel boots from nfs KernelCommandLine=!nfsroot [Network] Address=192.168.1.100/24 Gateway=192.168.1.254 DNS=192.168.1.1
Dynamic IP addres (DHCP)Edit
The network interface is configured - using a proper DHCP server on the network - by using the DHCP key in the configuration file as the following:
[Match] Name=eth0 # Prevent the interface loading if the kernel boots from nfs KernelCommandLine=!nfsroot [Network] DHCP=yes
When systemd network starts, it tries to use a DHCP server present in the network to configure the interface.
DNSEdit
The DNS key (in the configuration file) is used only if the systemd-resolved service is enabled and the /etc/resolv.conf has a symbolic link to /run/systemd/resolve/stub-resolv.conf
ln -sf /run/systemd/resolve/stub-resolv.conf /etc/resolv.conf
loopback network interfaceEdit
systemd contains native implementations of various tasks that need to be executed as part of the boot process.
For example, it sets the hostname or configures the loopback network device.
Apply configuration changesEdit
After editing the above files, changes are applied after reboot or by restarting systemd-networkd and systemd-resolved services:
root@desk-mx6:~# systemctl restart systemd-networkd root@desk-mx6:~# systemctl restart systemd-resolved