Changes

| 26||C17||ENET2_RX_DATA0||ENET2_RX_DATA0 / UART6_TX / I2C3_SCL / || Input || IO_3.3V ||Default: internally used as USB OTG power

| 28||C16||ENET2_RX_DATA1||ENET2_RX_DATA1 / UART6_RX / I2C3_SDA|| Input || IO_3.3V ||Default: internally used as USB OTG over current

| 30||B17||ENET2_RX_EN||ENET2_RX_EN / UART7_TX / I2C4_SCL /|| Input || IO_3.3V ||-

| 32||A15||ENET2_TX_DATA0||ENET2_TX_DATA0 / UART7_RX / I2C4_SDA /|| Output || IO_3.3V ||-

| 34||A16||ENET2_TX_DATA1||ENET2_TX_DATA1 / UART8_TX / SPI4_SCLK ECSPI4_SCLK || Output || IO_3.3V ||Default: internally used as USB HOST pwr

| 36||B15||ENET2_TX_EN||ENET2_TX_EN / UART8_RX / SPI4_MOSIECSPI4_MOSI || Output || IO_3.3V ||Default: internally used as USB HOST over current

| 38||D17||ENET2_TX_CLK||ENET2_TX_CLK UART8_CTS_B / UART8_CTS ECSPI4_MISO / SPI4_MISO / USB_OTG2_IDANATOP_OTG2_ID|| Output || IO_3.3V ||Default: internally used as UART8_CTS on MPUART0

| 40||D16||ENET2_RX_ER||ENET2_RX_ER UART8_RTS_B / UART8_RTS / SPI4_SS0ECSPI4_SS0 || Input || IO_3.3V ||Default: internally used as UART8_RTS on MPUART0

| 44||L16||GPIO1_IO07||GPIO ENET2_MDC / ENET2_MDIO / ADCADC1_IN7 || Input/Output || IO_3.3V ||Internally used as ENET1_MDIO

| 46||K17||GPIO1_IO06||GPIO ENET2_MDIO / ENET2_MDC / ADCADC1_IN6 || Input/Output || IO_3.3V ||Internally used as ENET1_MDC

| 48||M17||GPIO1_IO05||GPIO / UART5_RX / ADCADC1_IN5 || Input/Output || IO_3.3V ||-

| 50||M16||GPIO1_IO04||GPIO / UART5_TX / TSCX+ / ADCADC1_IN4 || Input/Output || IO_3.3V ||-