767
edits
Changes
no edit summary
==Serial console (J42)==
[[File:SBC Lynx-J42.png|thumb|center|300px|J42]]
System console is by default routed to this interface. This is typically used during the development stage.
{|class="wikitable" style="text-align: center;"
==Ethernet connector (J16)==
[[File:SBC Lynx-J16.png|thumb|center|300px|J16]]
J16 is a standard RJ45 10/100BaseT Ethernet connector - incorporating magnetics - connected to the Ethernet controller and PHY.
*LED on: link established
*LED blinking: activity.
The following table describes the interface signals:
==microSD slot (J43)==
[[File:SBC Lynx-J43.png|thumb|center|300px|J43]]
J43 is a push-pull microSD card slot connected to uSDHC1 port of MX6UL processor.
The following table details the pinout:
==USB host port (J48)==
[[File:SBC Lynx-J48.png|thumb|center|300px|J48]]
J48 is a standard USB Type A right angle connector connected to the MX6UL USB_OTG2 port signals.
The following table reports the connector's pinout:
==USB OTG port (J47)==
[[File:SBC Lynx-J47.png|thumb|center|300px|J47]]
J47 is a standard USB Type micro AB connector connected to the MX6UL USB_OTG1 port signals.
The following table reports the connector's pinout:
==Mezzanine board connectors (J53/J54)==
[[File:SBC Lynx-J53-J54.png|thumb|center|300px|J53-J54]]
J53 and J54 are 10x1-pin 2.54mm-pitch vertical headers for optional mezzanine expansion boards. These boards can be implemented to extend SBC Lynx functionalities and/or interfaces.
It is worth remembering that some of the mezzanine board connectors signals are reserved for internal use or shared with One Piece connector (J45 / J52). Please contact [mailto:sales@dave.eu Sales department] for more information.
The following tables report the connectors' pinout.
