BORA Xpress XILINX Zynq CPU module[edit | edit source]

BORA Xpress is the top-class Dual Cortex-A9 + FPGA CPU module by DAVE Embedded Systems, based on the recent Xilinx "Zynq" XC7Z015 / XC7Z030 application processor. BORA Xpress offers great computational power, thanks to the rich set of peripherals, the Dual Cortex-A9 and the Artix-7 FPGA inside. BORA Xpress is designed in order to keep full compatibility with the ULTRA Line CPU modules, to guarantee the premium quality and technical value of those customers that require top performances.

For detailed information about BORA Xpress, please refer to the BORA Xpress SOM article.

Main Features[edit | edit source]

• Unmatched performance thanks to Dual ARM Cortex-A9 @ up to 1GHz
• SERDES: Xpress lanes up to 6.25 Gbps
• All memories you need: on-board NOR and NAND Flash
• Enabling smarter system thanks to Artix-7 or Kintex-7 FPGA integrated on-chip
• FPGA banks wide range PSU input from 1.2V to 3.3V
• Highest security and reliability: internal voltage monitoring and power good enable
• Reduced carrier complexity: dual CAN, USB, Ethernet GB and native 3.3 V I/O
• Easy to fit thanks to its small form factor
• Accurate timing application thanks to on-board 5ppm RTC
• Pin2Pin Compatibility with BORA SOM based on Zynq XC7Z010/XC7Z020

BORA Xpress technical specification[edit | edit source]

CPU and Memories CPU Xilinx Dual ARM Cortex-A9 ZYNQ XC7Z015/ZC7Z030 @ up to 1GHz Cache 32 Kbyte instruction, 32 Kbyte data, 512 Kbyte L2 for each core SDRAM up to 1GB DDR3 @ 533 MHz NOR Bootable SPI NOR 8, 16 MB NAND All sizes, on request External local bus Expansion bus Peripherals Feature Specifications Options Coprocessors NEON™ & Single / Double Precision Floating Point for each processor USB Up to 2x 2.0 OTG ports UARTs Up to 2x UART ports GPIO Up to x lines, shared with other functions (interrupts available) Networks Ethernet 10/100/1000 Mbps CAN 2x full CAN 2.0B compliant interfaces SD/MMC 2x SD/SDIO 2.0/MMC3.31 compliant controllers Serial buses 2x full-duplex SPI ports with three peripheral chip selects 2x master and slave I²C interfaces Timers 2x triple timers/counters (TTC) RTC On board (DS3232), external battery powered Debug JTAG IEEE 1149.1 Test Access Port CoreSight™ and Program Trace Macrocell (PTM) Specifications Feature Specifications Options FPGA model Artix™-7 (Z-7015) Kintex-7 (Z-7030) Logic cells 74K 125K LUTs 46K 78K Flip flops 92K 157K RAM 380KB 1060KB DSP slices 160 400 Differential pairs Up to 4 PCI Express gen2 Electrical, mechanical and environmental specification Feature Specifications Options Supply Voltage 3.3V, on-board voltage regulation Active power consumption Please refer to Power consumption section Dimensions 85mm x 50mm Weight MTBF Operating temperature 0..70 °C -40..+85 °C Connectors 3 x 140 pin 0.6mm pitch

BORA Xpress Web Page BORA Xpress leaflet BORA Xpress Block Diagram

Hardware Documentation[edit | edit source]

Software Documentation[edit | edit source]

BORA Xpress Evaluation Kit[edit | edit source]

BORA Evaluation Kit BELK is a development/test board designed to start working with the BORA Xpress platform and experimenting with the implemented features.

Please refer to this page for more details.

Stay tuned with updates: BORA Xpress RSS Feed[edit | edit source]

Please subscribe to the Bora Pages Updates RSS Feed using your favourite RSS reader to be notified on wiki pages updates related to BORA.

Please refer to the Keeping updated on DAVE Embedded Systems Developer's wiki pages modifications section for further information on how to subscribe to the RSS feed.

Index of topics about BORA Xpress SoM[edit | edit source]

This category collects all the pages specific to BORA Xpress modules and related carrier boards.