AXEL ULite NXP/Freescale i.MX6 CPU module[edit | edit source]

AXEL ULite is the brand new solution made by DAVE Embedded Systems, based on the recent NXP/Freescale i.MX6 Ultra Lite application processor. AXEL ULite defines a new limit in low power consumption with its ARM Cortex A7 architecture and enables customers to design a new concept of Embedded IoT devices.

AXEL ULite offers great compromise between computing and power consumption, thanks to the ARM Cortex-A7 architecture. Additionally, the use of this processor enables extensive system-level differentiation of new applications in many industry fields, where power consumption, connectivity and extremely compact form factor (67,50 mm x around 25,40 mm) are key factors. The advanced security features and the three different CPU versions available (Base, General Purpose and Security) offer a wide scenario of applications. Smarter system designs are made possible, following the trends in functionalities and interfaces of the new, state-of-the-art embedded products.

Please visit AXEL ULite Web Page for more product information.

Main Features[edit | edit source]

• ULTRA LOW POWER thanks to ARM Cortex A7 MPCore@528 MHz
• pin to pin compatibility with AXEL LITE SOM based on i.MX6
• i.MX6 software full compatibility
• High flexibility with up to 4 different scalable CPU versions (Base, General Purpose, Security)
• Advanced security thanks to TRNG, Crypto Engine, etc.
• Embedded IoT, connectivity version with "blind CPU"
• Boot from NOR for safe applications
• up to 2 x Ethernet 10/100 Mbps with integrated switch
• Single 3V3 Power Supply with very low power stand by

AXEL ULite technical details[edit | edit source]

CPU and Memories Feature Specifications Options CPU NXP/Freescale i.MX6 UL ARM Cortex A7 MPCore @ 528 MHz Cache L1: 32 Kbyte instruction, 32 Kbyte data L2: Unified data/instruction, 128 K SDRAM up to 512 DDR3 -LV, x16 data bus width Storage SPI NOR 4 -32 MB on request Peripherals Feature Specifications Options Display subsystem Up to 24-Bits Data Output Resolution up to 1366 x 768 @ 60 fps (RGB) Video input Up to 1x CSI port 24 bit parallel USB up to 2x 2.0 OTG port (PHY on board) UARTs up to 8x UART ports GPIO GPIOs with interrupt capabilities LAN Ethernet 10/100 Mbps (PHY on board) additional MII/RMII interface CAN up to 2x CAN PC CARD up to 4x SD/MMC Serial buses up to 4x I²C channels up to 4x SPI channels Audio 1x I²S / SSI / S / PDIF Debug JTAG IEEE 1149.1 Test Access Port Electrical, Mechanical and Environmental Specifications Feature Specifications Options Supply Voltage 3.1V - 4.5V (depending on configuration), voltage regulation on board Typical configuration 3.3V±5% Active power consumption Please refer to Power consumption section Dimensions 67,50 mm x 25,40 mm Weight MTBF Operating temperature Commercial (0°C / +70°C) Temperature Range Industrial (-40°C / +85°C) Temperature Range Extended (-40°C / +105°C) Temperature Range Connectors SODIMM 204 pin

AXEL ULite Web Page AXEL ULite leaflet AXEL ULite Block Diagram

Hardware Documentation[edit | edit source]

Software Documentation[edit | edit source]

AXEL ULite Evaluation Kit[edit | edit source]

AXEL RSS Feed[edit | edit source]

Please subscribe to the Axel Pages Updates RSS Feed using your favourite RSS reader to be notified on wiki pages updates related to Axel.

Please refer to the Keeping updated on DAVE Embedded Systems Developer's wiki pages modifications section for further information on how to subscribe to the RSS feed.

Index of topics about AXEL ULite SoM[edit | edit source]

This category collects all the pages specific to AXEL ULite modules and related carrier boards.