CAN interfaces (Naon)
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
DM8148 processor integrates two CAN controller knows as DCAN0 and DCAN1.
DCAN0[edit | edit source]
By default DCAN0 is connected to on-board CAN transceiver (TI SN65HVD232). CAN_H and CAN_L signals are routed to pins J1.96 and J1.98 respectively.
Please note that CAN transceiver might be not populated on request. In this case DCAN0_TX and DCAN0_RX processor's signals are routed to J1.96 and J1.98 respectively. For more details about this option please contact Sales department.
DCAN1[edit | edit source]
DCAN1 TX and RX signals are connected to J1.19 and J1.21 rispectively.
