Building the Yocto BSP (XUELK)
|As the XELK kit is based on Yocto, the implementation of the MVM follows the approach described here. As such, the reading of this section is highly recommended.|
|December 2016||XUELK 1.1.0|
|May 2017||XUELK 1.2.0|
|2.0.0||Sep 2017||XUELK 2.0.0|
|Repository||BSP Manifest||Yocto BSP Layer|
|lynx-image-devel||minimal for development/debugging image|
|lynx-image-networking||based on lynx-image-devel plus networking tools|
|lynx-image-core||minimal working image with SSH|
|lynx-image-gui||based on lynx-image-core with additional tools to support the graphical environment|
This is a quickstart guide to build Yocto BSP for Axel ULite SOM and SBC Lynx, to rebuild the binaries (u-boot, linux kernel, root file system) provided with XUELK releases.
For more information regarding Yocto build system, go to its dedicated category page
Build System prerequisitesEdit
XUELK MVM is already configured to build this Yocto version/configuration, however, users typically don't use a VirtualBox VM for Yocto builds for performance reasons.
You can refer to Yocto manual setup section for a list of supported Linux distribution and their configuration to create your own build environment on your favorite distribution.
Build the XUELK Yocto BSPEdit
Initialize the build environmentEdit
XUELK Yocto BSP uses git-repo tool to fetch all the required git repositories to build
dvdk@dvdk-vm:~/lynx$ curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > repo dvdk@dvdk-vm:~/lynx$ chmod a+x repo dvdk@dvdk-vm:~/lynx$ ./repo init -u firstname.lastname@example.org:lynx/lynx-bsp.git -b lynx-krogoth dvdk@dvdk-vm:~/lynx$ ./repo sync
Build the Yocto BSP imageEdit
Please note that even the basic root file system requires a few hours to build on a mid/hi range desktop (4-6 cores, 8-12 GiB RAM) also depending on your Internet connection speed (all sources are fetched from the network). Nearly 20GiB of disk space is required for the build. Moreover, building inside the DVDK adds some overhead, since the performances of a virtual machine are reduced if compared to the physical hardware. Thus, it's recommended to check the hardware capabilities of the host system and, when building with Yocto is required, developers should consider the following options:
- migrating the build system to a physical machine
- assuming that the host system has the required resources, extending the hardware capabilities of the default DVDK (eg: adding more cores and disk space)
Once completed the initialization phase, developers can launch the Yocto image build process with the following commands:
dvdk@dvdk-vm:~/lynx$ DISTRO=fsl-imx-fb MACHINE=sbc-lynx source lynx-setup-release.sh -b build dvdk@dvdk-vm:~/lynx/build$ bitbake lynx-image-networking
The resulting files (kernel, devicetree and u-boot binaries, plus .tar.gz root file system) will then be available inside build/tmp/deploy/images/sbc-lynx.
Generating the SDKsEdit
After creating an image as described above, the corresponding SDK can be generated by issuing the following command:
bitbake <target-image-name> -c populate-sdk
<target-image-name> with one of the images listed in here.
Build additional packagesEdit
To build additional packages the user must first enter the directory where the
lynx-setup-release.sh is placed and source it
dvdk@dvdk-vm:~/lynx$ DISTRO=fsl-imx-fb MACHINE=sbc-lynx source lynx-setup-release.sh -b build dvdk@dvdk-vm:~/lynx/build$
And then he can run any of the bitbake commands.
dvdk@dvdk-vm:~/lynx/build$ bitbake memtester
The resulting packages (the default format is ipk) can be found inside build/tmp/deploy/rpm.
dvdk@dvdk-vm:~/lynx/build$ ls -l tmp/deploy/rpm/cortexa7hf_vfp_neon/memtester* -rw-r--r-- 1 dvdk dvdk 9967 Sep 7 05:43 tmp/deploy/rpm/cortexa7hf_vfp_neon/memtester-4.1.3-r0.cortexa7hf_vfp_neon.rpm -rw-r--r-- 1 dvdk dvdk 25544 Sep 7 05:43 tmp/deploy/rpm/cortexa7hf_vfp_neon/memtester-dbg-4.1.3-r0.cortexa7hf_vfp_neon.rpm -rw-r--r-- 1 dvdk dvdk 2884 Sep 7 05:42 tmp/deploy/rpm/cortexa7hf_vfp_neon/memtester-dev-4.1.3-r0.cortexa7hf_vfp_neon.rpm -rw-r--r-- 1 dvdk dvdk 5611 Sep 7 05:44 tmp/deploy/rpm/cortexa7hf_vfp_neon/memtester-doc-4.1.3-r0.cortexa7hf_vfp_neon.rpm