*enter the source tree directory and run the following commands:
</pre>
'''NOTE: ''' this is the default configuration suitable for latest SBC Lynx DIVA target.The other defined configs for different boot sources are: <pre> make diva_defconfig make diva_spiboot_defconfig make diva_nandboot_defconfig make diva_devel_defconfig</pre>
:The former command selects the default DIVA configuration suitable for latest DIVELK targets , while the latter builds the U-Boot binary image itself binaries (<code>MLO</code>, <code>MLO.byteswap</code>. <code>u-boot.img</code>).
u-boot.img binaries can be copied to the tftp root directory <code>/tftpboot/diva/</code> with the following command:
<pre class="workstation-terminal">
cp MLO /tftpboot/diva/
cp MLO.byteswap /tftpboot/diva/
cp u-boot.img /tftpboot/diva/
</pre>
Please refer to [[Flashing Images Standalone_boot_(DIVELK)#U-Boot]] for more information in how to update the bootloader on you board.