Bureaucrats, dave_user, Administrators
4,650
edits
Changes
→Examples of valid combinations for Zynq 7015-based SOMs
{{InfoBoxTop}}
{{Applies To BoraX}}
{{Applies To BoraLite}}
{{InfoBoxBottom}}
{{WarningMessage|text=By default, BoraXEVB comes with a Zynq 7030-based SOMSoM when it is sold with BoraX. HoweverWhen it is sold with Bora Lite, it is mated with a Zynq 7020-based SoM instead. Nevertheless, BoarX can host different models of BoraX SOMand Bora Lite SoM's. From the point of view of PL's I/O voltage levels, different models may not be equivalent. Please refer to [[#PL's I/O voltage selections|this section]] to avoid unsupported configurations that '''may damage the hardware permanently'''.}}
==Introduction==
BORA Xpress EVB is a carrier board designed to host [[BORA_Xpress_SOM|BORA Xpress system-on-module]].
For a detailed description of FMC connector routing, please refer to [[#FPGA Mezzanine Card (FMC) Connector - J27|this section]].
====BoraX====
[[File:Boraxevb-FPGA-signals-routing.png|thumb|center|600px|Configurable routing options diagram]]
====Bora Lite====
[[File:Boralite-boraxevb-FPGA-signals-routing.png|center|thumb|862x862px|Configurable routing options diagram for BoraLite SoM]]
== Features ==
|}
<b>(*)</b> Boot mode from NAND in not supported '''ONLY''' on actual BSP version[[:Category:BoraLite |BoraLite]] SOM module
=== WatchDog Settings - S1, S2 and S3 ===
|8 ||PS_SD0_DAT1||| - || -
|-
|13 |3.3V||| - || ||Pull up to 3.3V with 10K Ohm -
|-
|}
|-
|}
==== Ethernet GPIO - JP18 ====
|-
|}
==== SPI,NAND - JP19 ====
|-
|}
==== Digilent Pmod™ Compatible - JP23 ====
The following table recaps the characteristics of the PL's I/O banks, in terms of allowable power supplies.
{|class="wikitable" style="text-align: center;"! rowspan="2" |SoM
! rowspan="2" style="text-align: center; font-weight: bold;" | Zynq p/n
! colspan="2" style="text-align: center; font-weight: bold;" | Bank #34
| style="text-align: center; font-weight: bold;" | I/O voltage setting
|-
| rowspan="2" |BoraX
| style="text-align: center;" | 7015
(CLG485 package)
| style="text-align: center;" | HP
(1.2 - 1.8V)
| style="text-align: center;" | User defined
|-
| rowspan="2" |Bora Lite
| style="text-align: center;" | 7007S/7010
(CLG400 package)
| style="text-align: center;" | HR
(1.2 - 3.3V)
| style="text-align: center;" | User defined
| style="text-align: center;" | HR
(1.2 - 3.3V)
| style="text-align: center;" | User defined
| style="text-align: center;" | HR
(1.2 - 3.3V)
| style="text-align: center;" | User defined
|-
| style="text-align: center;" | 7014S/7020
(CLG400 package)
| style="text-align: center;" | HR
(1.2 - 3.3V)
| style="text-align: center;" | User defined
| style="text-align: center;" | HR
(1.2 - 3.3V)
| style="text-align: center;" | User defined
| style="text-align: center;" | HR
(1.2 - 3.3V)
| style="text-align: center;" | User defined
|}
This configuration is in accordance with default routing of signals used for FMC connector.
====Examples of valid combinations for Zynq 7030-based SOMs (default option for BXELK)====
{|class="wikitable" style="text-align: center;"
|+Bank #13 (HR)
|-
|}
{|class="wikitable" style="text-align: center;"
|+Bank #35 (HP)
|-
|}
{|class="wikitable" style="text-align: center;"
|+Bank #34 (HP)
|-
====Examples of valid combinations for Zynq 7015-based SOMs====
{|class="wikitable" style="text-align: center;"
|+Bank #13 (HR)
|-
|}
{|class="wikitable" style="text-align: center;"
|+Bank #35 (HR)
|-
|}
{|class="wikitable" style="text-align: center;"|+Bank #34 (HPHR)
|-
! style="text-align: center; font-weight: bold;" | Nominal voltage [V]
The default configuration is:
# Jumper on 5-6 -> supply VADJ with 1.8V
==SoM's signals mapping==
===Bora Lite===
As known, Bora Lite requires an [[BoraLite_Adapter_for_the_BoraXEVB_carrier_board|adapter]] to be mounted on the BoraXEVB carrier board. The adapter swap some signals to allow to use some carrier board peripherals routed on unavailable pins of the SoM. For this reason, it can be tricky to find out where the SoM's signals are routed at the carrier board level. The following table details such routing for PL banks. Here '''it is assumed to use an adapter with default mounting options'''.
{| class="wikitable"
|+
! colspan="2" |SoM's signal
! colspan="6" |Routing options at carrier board level
|-
! rowspan="2" |Bank
! rowspan="2" |Name
! colspan="3" |Option #1
(default)
! colspan="3" |Option #2
|-
!Name
!Pin
!Note
!Name
!Pin
!Note
|-
| rowspan="54" |34
| rowspan="2" |IO_0_34
| rowspan="2" |'''IO_0_VRN_34'''
|J31.2
|Header
| rowspan="2" |
| rowspan="2" |
| rowspan="2" |
|-
|J27D.H2
|FMC conn.
|-
| rowspan="2" |IO_25_34
| rowspan="2" |'''IO_25_VRP_35'''
|J31.4
|Header
| rowspan="2" |
| rowspan="2" |
| rowspan="2" |
|-
|J27B.D1
|FMC conn.
|-
|IO_L10N_T1_34
|IO_L10N_T1_34
|J27D.H26
|FMC conn.
|
|
|
|-
|IO_L10P_T1_34
|IO_L10P_T1_34
|J27D.H25
|FMC conn.
|
|
|
|-
|IO_L11N_T1_SRCC_34
|IO_L11N_T1_SRCC_34
|J27D.G3
|FMC conn.
|
|
|
|-
|IO_L11P_T1_SRCC_34
|IO_L11P_T1_SRCC_34
|J27D.G2
|FMC conn.
|
|
|
|-
|IO_L12N_T1_MRCC_34
|IO_L12N_T1_MRCC_34
|J27D.H5
|FMC conn.
|
|
|
|-
|IO_L12P_T1_MRCC_34
|IO_L12P_T1_MRCC_34
|J27D.H4
|FMC conn.
|
|
|
|-
|IO_L13N_T2_MRCC_34
|'''IO_L13N_T1_MRCC_34'''
|J27D.G7
|FMC conn.
|
|
|
|-
|IO_L13P_T2_MRCC_34
|'''IO_L13P_T1_MRCC_34'''
|J27D.G6
|FMC conn.
|
|
|
|-
|IO_L14N_T2_SRCC_34
|IO_L14N_T2_SRCC_34
|J27B.D9
|FMC conn.
|
|
|
|-
|IO_L14P_T2_SRCC_34
|IO_L14P_T2_SRCC_34
|J27B.D8
|FMC conn.
|
|
|
|-
|IO_L15N_T2_DQS_34
|IO_L15N_T2_DQS_34
|J27B.D21
|FMC conn.
|
|
|
|-
|IO_L15P_T2_DQS_34
|IO_L15P_T2_DQS_34
|J27B.D20
|FMC conn.
|
|
|
|-
|IO_L16N_T2_34
|IO_L16N_T2_34
|J27B.C23
|FMC conn.
|
|
|
|-
|IO_L16P_T2_34
|IO_L16P_T2_34
|J27B.C22
|FMC conn.
|
|
|
|-
|IO_L17N_T2_34
|IO_L17N_T2_34
|J27D.G22
|FMC conn.
|
|
|
|-
|IO_L17P_T2_34
|IO_L17P_T2_34
|J27D.G21
|FMC conn.
|
|
|
|-
|IO_L18N_T2_34
|IO_L18N_T2_34
|J27D.H20
|FMC conn.
|
|
|
|-
|IO_L18P_T2_34
|IO_L18P_T2_34
|J27D.H19
|FMC conn.
|
|
|
|-
| rowspan="2" |IO_L19N_T3_VREF_34
| rowspan="2" |IO_L19N_T3_VREF_34
|J27D.G19
|FMC conn.
| rowspan="2" |
| rowspan="2" |
| rowspan="2" |
|-
|TP21
|TP SMD
|-
|IO_L19P_T3_34
|n/a
|n/a
|At the adapter level, this signal (as CAN_RX) is connected to a CAN transceiver. The CAN bus is available at J24.
|
|
|
|-
|IO_L1N_T0_34
|IO_L1N_T0_34
|J27B.C19
|FMC conn.
|
|
|
|-
|IO_L1P_T0_34
|IO_L1P_T0_34
|J27B.C18
|FMC conn.
|
|
|
|-
|IO_L20N_T3_34
|IO_L20N_T3_34
|J27B.D18
|FMC conn.
|
|
|
|-
|IO_L20P_T3_34
|IO_L20P_T3_34
|J27B.D17
|FMC conn.
|
|
|
|-
|IO_L21N_T3_DQS_34
|IO_L21N_T3_DQS_34
|J27D.H17
|FMC conn.
|
|
|
|-
|IO_L21P_T3_DQS_34
|IO_L21P_T3_DQS_34
|J27D.H16
|FMC conn.
|
|
|
|-
|IO_L22N_T3_34
|IO_L22N_T3_34
|J27D.G16
|FMC conn.
|
|
|
|-
|IO_L22P_T3_34
|IO_L22P_T3_34
|J27D.G15
|FMC conn.
|
|
|
|-
|IO_L23N_T3_34
|IO_L23N_T3_34
|J27B.C11
|FMC conn.
|
|
|
|-
|IO_L23P_T3_34
|IO_L23P_T3_34
|J27B.C10
|FMC conn.
|
|
|
|-
|IO_L24N_T3_34
|IO_L24N_T3_34
|J27D.H23
|FMC conn.
|
|
|
|-
|IO_L24P_T3_34
|IO_L24P_T3_34
|J27D.H22
|FMC conn.
|
|
|
|-
|IO_L2N_T0_34
|IO_L2N_T0_34
|J27B.C15
|FMC conn.
|
|
|
|-
|IO_L2P_T0_34
|IO_L2P_T0_34
|J27B.C14
|FMC conn.
|
|
|
|-
|IO_L3N_T0_DQS_34
|IO_L3N_T0_DQS_34
|J27D.G13
|FMC conn.
|
|
|
|-
|IO_L3P_T0_DQS_PUDC_B_34
(10K pull-up on SoM)
|IO_L3P_T0_DQS_PUDC_B_34
|J27D.G12
|FMC conn.
|
|
|
|-
|IO_L4N_T0_34
|IO_L4N_T0_34
|J27D.G10
|FMC conn.
|
|
|
|-
|IO_L4P_T0_34
|IO_L4P_T0_34
|J27D.G9
|FMC conn.
|
|
|
|-
|IO_L5N_T0_34
|IO_L5N_T0_34
|J27D.H11
|FMC conn.
|
|
|
|-
|IO_L5P_T0_34
|IO_L5P_T0_34
|J27D.H10
|FMC conn.
|
|
|
|-
| rowspan="2" |IO_L6N_T0_VREF_34
| rowspan="2" |IO_L6N_T0_VREF_34
|J27B.D15
|FMC conn.
|
|
|
|-
|TP22
|TP SMD
|
|
|
|-
|IO_L6P_T0_34
|n/a
|n/a
|At the adapter level, this signal (as CAN_TX) is connected to a CAN transceiver. The CAN bus is available at J24.
|
|
|
|-
|IO_L7N_T1_34
|IO_L7N_T1_34
|J27D.H8
|FMC conn.
|
|
|
|-
|IO_L7P_T1_34
|IO_L7P_T1_34
|J27D.H7
|FMC conn.
|
|
|
|-
|IO_L8N_T1_34
|IO_L8N_T1_34
|J27D.H14
|FMC conn.
|
|
|
|-
|IO_L8P_T1_34
|IO_L8P_T1_34
|J27D.H13
|FMC conn.
|
|
|
|-
|IO_L9N_T1_DQS_34
|IO_L9N_T1_DQS_34
|J27B.D12
|FMC conn.
|
|
|
|-
|IO_L9P_T1_DQS_34
|IO_L9P_T1_DQS_34
|J27B.D11
|FMC conn.
|
|
|
|-
|
|
|
|
|
|
|
|
|-
| rowspan="54" |35
| rowspan="2" |IO_0_35
| rowspan="2" |'''IO_0_VRN_35'''
|J27C.F1
|FMC conn.
| rowspan="2" |
| rowspan="2" |
| rowspan="2" |
|-
|J31.1
|Header
|-
| rowspan="2" |IO_25_35
| rowspan="2" |'''IO_25_VRP_35'''
|J27E.K13
|FMC conn.
| rowspan="2" |
| rowspan="2" |
| rowspan="2" |
|-
|J31.3
|Header
|-
|IO_L10N_T1_AD11N_35
|IO_L10N_T1_AD11N_35
|J27D.G34
|FMC conn.
|FPGA_BANK35_AD11N
|JP32.3
|Header
|-
|IO_L10P_T1_AD11P_35
|IO_L10P_T1_AD11P_35
|J27D.G33
|FMC conn.
|FPGA_BANK35_AD11P
|JP32.1
|Header
|-
|IO_L11N_T1_SRCC_35
|IO_L11N_T1_SRCC_35
|J27E.J3
|FMC conn.
|
|
|
|-
|IO_L11P_T1_SRCC_35
|IO_L11P_T1_SRCC_35
|J27E.J2
|FMC conn.
|
|
|
|-
|IO_L12N_T1_MRCC_35
|IO_L12N_T1_MRCC_35
|J27E.K5
|FMC conn.
|
|
|
|-
|IO_L12P_T1_MRCC_35
|IO_L12P_T1_MRCC_35
|J27E.K4
|FMC conn.
|
|
|
|-
|IO_L13N_T2_MRCC_35
|IO_L13N_T2_MRCC_35
|J27C.F5
|FMC conn.
|
|
|
|-
|IO_L13P_T2_MRCC_35
|IO_L13P_T2_MRCC_35
|J27C.F4
|FMC conn.
|
|
|
|-
|IO_L14N_T2_AD4N_SRCC_35
|IO_L14N_T2_AD4N_SRCC_35
|J27C.E3
|FMC conn.
|FPGA_BANK35_AD4N
|JP30.16
|Header
|-
|IO_L14P_T2_AD4P_SRCC_35
|IO_L14P_T2_AD4P_SRCC_35
|J27C.E2
|FMC conn.
|FPGA_BANK35_AD4P
|JP30.14
|Header
|-
|IO_L15N_T2_DQS_AD12N_35
|IO_L15N_T2_DQS_AD12N_35
|J27D.H38
|FMC conn.
|FPGA_BANK35_AD12N
|JP32.8
|Header
|-
|IO_L15P_T2_DQS_AD12P_35
|IO_L15P_T2_DQS_AD12P_35
|J27D.H37
|FMC conn.
|FPGA_BANK35_AD12P
|JP32.6
|Header
|-
|IO_L16N_T2_35
|IO_L16N_T2_35
|J27D.G37
|FMC conn.
|
|
|
|-
|IO_L16P_T2_35
|IO_L16P_T2_35
|J27D.G36
|FMC conn.
|
|
|
|-
|IO_L17N_T2_AD5N_35
|IO_L17N_T2_AD5N_35
|J27E.K8
|FMC conn.
|FPGA_BANK35_AD5N
|JP31.1
|Header
|-
|IO_L17P_T2_AD5P_35
|IO_L17P_T2_AD5P_35
|J27E.K7
|FMC conn.
|FPGA_BANK35_AD5P
|JP30.15
|Header
|-
|IO_L18N_T2_AD13N_35
|IO_L18N_T2_AD13N_35
|J27E.J7
|FMC conn.
|FPGA_BANK35_AD13N
|JP32.9
|Header
|-
|IO_L18P_T2_AD13P_35
|IO_L18P_T2_AD13P_35
|J27E.J6
|FMC conn.
|FPGA_BANK35_AD13P
|JP32.7
|Header
|-
| rowspan="2" |IO_L19N_T3_VREF_35
| rowspan="2" |IO_L19N_T3_VREF_35
|J27C.F8
|FMC conn.
| rowspan="2" |
| rowspan="2" |
| rowspan="2" |
|-
|TP24
|TP SMD
|-
|IO_L19P_T3_35
|IO_L19P_T3_35
|J27C.F7
|FMC conn.
|
|
|
|-
|IO_L1N_T0_AD0N_35
|IO_L1N_T0_AD0N_35
|J27D.G25
|FMC conn.
|FPGA_BANK35_AD0P
|JP30.4
|Header
|-
|IO_L1P_T0_AD0P_35
|IO_L1P_T0_AD0P_35
|J27D.G24
|FMC conn.
|FPGA_BANK35_AD0N
|JP30.2
|Header
|-
|IO_L20N_T3_AD6N_35
|IO_L20N_T3_AD6N_35
|J27C.E7
|FMC conn.
|FPGA_BANK35_AD6N
|JP31.6
|Header
|-
|IO_L20P_T3_AD6P_35
|IO_L20P_T3_AD6P_35
|J27C.E6
|FMC conn.
|FPGA_BANK35_AD6P
|JP31.4
|Header
|-
|IO_L21N_T3_DQS_AD14N_35
|IO_L21N_T3_DQS_AD14N_35
|J27E.K11
|FMC conn.
|FPGA_BANK35_AD14N
|JP32.14
|Header
|-
|IO_L21P_T3_DQS_AD14P_35
|IO_L21P_T3_DQS_AD14P_35
|J27E.K10
|FMC conn.
|FPGA_BANK35_AD14P
|JP32.12
|Header
|-
|IO_L22N_T3_AD7N_35
|IO_L22N_T3_AD7N_35
|J27E.J10
|FMC conn.
|FPGA_BANK35_AD7N
|JP31.7
|Header
|-
|IO_L22P_T3_AD7P_35
|IO_L22P_T3_AD7P_35
|J27E.J9
|FMC conn.
|FPGA_BANK35_AD7P
|JP31.5
|Header
|-
|IO_L23N_T3_35
|IO_L23N_T3_35
|J27C.F11
|FMC conn.
|
|
|
|-
|IO_L23P_T3_35
|IO_L23P_T3_35
|J27C.F10
|FMC conn.
|
|
|
|-
|IO_L24N_T3_AD15N_35
|IO_L24N_T3_AD15N_35
|J27C.E10
|FMC conn.
|FPGA_BANK35_AD15N
|JP32.15
|Header
|-
|IO_L24P_T3_AD15P_35
|IO_L24P_T3_AD15P_35
|J27C.E9
|FMC conn.
|FPGA_BANK35_AD15P
|JP32.13
|Header
|-
|IO_L2N_T0_AD8N_35
|IO_L2N_T0_AD8N_35
|J27B.D24
|FMC conn.
|FPGA_BANK35_AD8N
|JP31.12
|Header
|-
|IO_L2P_T0_AD8P_35
|IO_L2P_T0_AD8P_35
|J27B.D23
|FMC conn.
|FPGA_BANK35_AD8P
|JP31.10
|Header
|-
|IO_L3N_T0_DQS_AD1N_35
|IO_L3N_T0_DQS_AD1N_35
|J27D.H29
|FMC conn.
|FPGA_BANK35_AD1N
|JP30.5
|Header
|-
|IO_L3P_T0_DQS_AD1P_35
|IO_L3P_T0_DQS_AD1P_35
|J27D.H28
|FMC conn.
|FPGA_BANK35_AD1P
|JP30.3
|Header
|-
|IO_L4N_T0_35
|IO_L4N_T0_35
|J27D.G28
|FMC conn.
|
|
|
|-
|IO_L4P_T0_35
|IO_L4P_T0_35
|J27D.G27
|FMC conn.
|
|
|
|-
|IO_L5N_T0_AD9N_35
|IO_L5N_T0_AD9N_35
|J27B.D27
|FMC conn.
|FPGA_BANK35_AD9N
|JP31.13
|Header
|-
|IO_L5P_T0_AD9P_35
|IO_L5P_T0_AD9P_35
|J27B.D26
|FMC conn.
|FPGA_BANK35_AD9P
|JP31.11
|Header
|-
| rowspan="2" |IO_L6N_T0_VREF_35
| rowspan="2" |IO_L6N_T0_VREF_35
|J27B.C27
|FMC conn.
| rowspan="2" |
| rowspan="2" |
| rowspan="2" |
|-
|TP23
|TP SMD
|-
|IO_L6P_T0_35
|IO_L6P_T0_35
|J27B.C26
|FMC conn.
|
|
|
|-
|IO_L7N_T1_AD2N_35
|IO_L7N_T1_AD2N_35
|J27D.H32
|FMC conn.
|FPGA_BANK35_AD2N
|JP30.10
|Header
|-
|IO_L7P_T1_AD2P_35
|IO_L7P_T1_AD2P_35
|J27D.H31
|FMC conn.
|FPGA_BANK35_AD2P
|JP30.8
|Header
|-
|IO_L8N_T1_AD10N_35
|IO_L8N_T1_AD10N_35
|J27D.G31
|FMC conn.
|FPGA_BANK35_AD10N
|JP32.2
|Header
|-
|IO_L8P_T1_AD10P_35
|IO_L8P_T1_AD10P_35
|J27D.G30
|FMC conn.
|FPGA_BANK35_AD10P
|JP31.16
|Header
|-
|IO_L9N_T1_DQS_AD3N_35
|IO_L9N_T1_DQS_AD3N_35
|J27D.H35
|FMC conn.
|FPGA_BANK35_AD3N
|JP30.11
|Header
|-
|IO_L9P_T1_DQS_AD3P_35
|IO_L9P_T1_DQS_AD3P_35
|J27D.H34
|FMC conn.
|FPGA_BANK35_AD3P
|JP30.9
|Header
|-
|
|
|
|
|
|
|
|
|-
| rowspan="26" |13
'''(not available on Zynq 7007S and 7010)'''
|IO_L11P_T1_SRCC_13
|'''IO_L23P_T3_13'''
|JP17.3
|PMOD [A]
|
|
|
|-
|IO_L11N_T1_SRCC_13
|'''IO_L23N_T3_13'''
|JP17.4
|PMOD [A]
|
|
|
|-
|IO_L12P_T1_MRCC_13
|'''IO_L9P_T1_DQS_13'''
|JP17.2
|PMOD [A]
|IO_L9P_T1_DQS_13
|J30.1
|ONE PIECE
|-
|IO_L12N_T1_MRCC_13
|'''IO_L9N_T1_DQS_13'''
|JP17.1
|PMOD [A]
|IO_L9N_T1_DQS_13
|J30.3
|ONE PIECE
|-
|IO_L13P_T2_MRCC_13
|'''IO_L7P_T1_13'''
|JP17.7
|PMOD [A]
|IO_L7P_T1_13
|J30.24
|ONE PIECE
|-
|IO_L13N_T2_MRCC_13
|'''IO_L7N_T1_13'''
|JP17.8
|PMOD [A]
|IO_L7N_T1_13
|J30.26
|ONE PIECE
|-
|IO_L14P_T2_SRCC_13
|'''IO_L15P_T2_DQS_13'''
|n/a
|ETH1_RXCK
|IO_L15P_T2_DQS_13
|J30.25
|ONE PIECE
|-
|IO_L14N_T2_SRCC_13
|'''IO_L15N_T2_DQS_13'''
|n/a
|ETH1_RXCTL
|IO_L15N_T2_DQS_13
|J30.27
|ONE PIECE
|-
|IO_L15P_T2_DQS_13
|'''IO_L5P_T0_13'''
|JP17.6
|PMOD [A]
|IO_L5P_T0_13
|J30.20
|ONE PIECE
|-
|IO_L15N_T2_DQS_13
|'''IO_L5N_T0_13'''
|JP17.5
|PMOD [A]
|IO_L5N_T0_13
|J30.18
|ONE PIECE
|-
|IO_L16N_T2_13
|IO_L16N_T2_13
|n/a
|ETH1_TXCTL
|IO_L16N_T2_13
|J30.31
|ONE PIECE
|-
|IO_L16P_T2_13
|IO_L16P_T2_13
|n/a
|ETH1_TXCK
|IO_L16P_T2_13
|J30.29
|ONE PIECE
|-
|IO_L17N_T2_13
|IO_L17N_T2_13
|n/a
|ETH1_RXD1
|IO_L17N_T2_13
|J30.35
|ONE PIECE
|-
|IO_L17P_T2_13
|IO_L17P_T2_13
|n/a
|ETH1_RXD0
|IO_L17P_T2_13
|J30.33
|ONE PIECE
|-
|IO_L18N_T2_13
|IO_L18N_T2_13
|n/a
|ETH1_RXD3
|IO_L18N_T2_13
|J30.39
|ONE PIECE
|-
|IO_L18P_T2_13
|IO_L18P_T2_13
|n/a
|ETH1_RXD2
|IO_L18P_T2_13
|J30.37
|ONE PIECE
|-
|IO_L19N_T3_VREF_13
|IO_L19N_T3_VREF_13
|n/a
|ETH1_TXD1
|IO_L19N_T3_VREF_13
|J30.43
|ONE PIECE
|-
|IO_L19P_T3_13
|IO_L19P_T3_13
|n/a
|ETH1_TXD0
|IO_L19P_T3_13
|J30.41
|ONE PIECE
|-
|IO_L20N_T3_13
|IO_L20N_T3_13
|n/a
|ETH1_TXD3
|IO_L20N_T3_13
|J30.47
|ONE PIECE
|-
|IO_L20P_T3_13
|IO_L20P_T3_13
|n/a
|ETH1_TXD2
|IO_L20P_T3_13
|J30.45
|ONE PIECE
|-
|IO_L21N_T3_DQS_13
|IO_L21N_T3_DQS_13
|n/a
|ETH1_MDC
|IO_L21N_T3_DQS_13
|J30.51
|ONE PIECE
|-
|IO_L21P_T3_DQS_13
|IO_L21P_T3_DQS_13
|n/a
|ETH1_MDIO
|IO_L21P_T3_DQS_13
|J30.49
|ONE PIECE
|-
|IO_L22N_T3_13
|IO_L22N_T3_13
|
|
|IO_L22N_T3_13
|J30.55
|ONE PIECE
|-
|IO_L22P_T3_13
|IO_L22P_T3_13
|n/a
|DWM_WIFI_IRQ
|IO_L22P_T3_13
|J30.53
|ONE PIECE
|-
| rowspan="2" |IO_L6N_T0_VREF_13
| rowspan="2" |IO_L6N_T0_VREF_13
|JP23.3
|PMOD [B]
| rowspan="2" |IO_L6N_T0_VREF_13
| rowspan="2" |J30.30
| rowspan="2" |ONE PIECE
|-
|n/a
|USB1_OC
|}
==== BoraXEVB unavailable signals ====
Some BoraXEVB signals are unavailable when it is mated with Bora Lite SoM. The following signals are '''not''' routed to the SoM due to the limited pin count of the SODIMM connector.
{| class="wikitable"
|+
BoraXEVB's signal that are not available when mated with Bora Lite SoM
!Bank
!Carrier's signal
|-
|13
|IO_25_13
|-
|13
|IO_L1P_T0_13
|-
|13
|IO_L1N_T0_13
|-
|13
|IO_L2P_T0_13
|-
|13
|IO_L2N_T0_13
|-
|13
|IO_L3P_T0_DQS_13
|-
|13
|IO_L3N_T0_DQS_13
|-
|13
|IO_L4P_T0_13
|-
|13
|IO_L4N_T0_13
|-
|500
|NAND_CS0/SPI0_CS1
|-
|500
|NAND_IO3
|-
|500
|NAND_IO4
|-
|500
|NAND_IO5
|-
|500
|NAND_IO6
|-
|500
|NAND_IO7
|-
|500
|NAND_RD_B/VCFG1
|-
|500
|NAND_CLE/VCFG0
|}
==Schematics==
* ORCAD: [[mirror:bora/hw/BoraXEVB/BORAXEVB-1.6.01-BELK-dsn.zip|BORAXEVB-1.6.01-BELK-dsn.zip]]* PDF : [[mirror:bora/hw/BoraXEVB/S-EVBBX0000C0R-1.6.0_color1_color.pdf|BoraXEVB-S-EVBBX0000C0R-1.6.01.pdf]]
==BOM==
* BoraXEVB: [[mirror:bora/hw/BoraXEVB/boraxevb-BOM_SBORAXEVB_S.EVBBX0000C0R.1.46.10.CSV_CSV.zip|boraxevb-BOM_SBORAXEVB_S.EVBBX0000C0R.1.46.10.CSV_CSV.zip]]
==Layout==
