| SD-card || OFF || ON || OFF || ON || ON || OFF || ON || OFF
|-
| NAND (*) || OFF || ON || OFF || ON || ON || OFF || ON || ON
|-
| JTAG || OFF || ON || OFF || ON || ON || ON || ON || ON
|}
<b>(*)</b> Boot mode from NAND in not supported on actual BSP version
=== WatchDog Settings - S1, S2 and S3 ===
|-
|12 ||LCD_LVDS_D2+ || - || -
|-
|14 ||LCD_LVDS_CLK- || - || -
|-
|15 ||LCD_LVDS_CLK+ || - || -
The following tables detail how BORA Xpress signals have been routed to FMC connector. At this [[:File:BoraXEVB-FMC-routing.zip|link]] a spreadsheet providing the same information is available for download.
For more information about I/O voltage of single-ended signals available on FMC connector, please refer to [[#PL's I/O voltage selections|this section]].
==== HPC Row A ====
|-
|}
===JP27, JP27 and JP28===
These connectors allow to select power voltage of PL's I/O banks. For more details please refer to [[#PL's I/O voltage selections|this section]].
==PL's I/O voltage selections==
*HP = High Performance
===BoraXEVB voltage selection settingsjumpers===
BoraXEVB provides several configuration jumpers that allow to easily select the voltages used for PL's I/O banks. The following tables lists some of the allowed combinations used to select the most common voltage values. There are other combination available. However, '''some of them are not allowed and may cause permanent hardware damages to the Zynq part'''.
Since characteristics of PL's I/O banks differ between Zynq 7015 and 7030 parts, the valid combinations '''are not the same for all of the BoraX models'''. Please refer to the following sections for more details.
====Zynq 7030-based SOMs (default option for BXELK)====