Bureaucrats, dave_user, Administrators
4,650
edits
Changes
→PL's I/O voltage selections
*'''each bank must be powered even if none of its I/Os is used'''
*'''voltage selection must be done before powering up the board'''.
The following table recaps the characteristics of the PL's I/O banks, in terms of allowable power supplies.
{|class="wikitable" style="text-align: center;"
*HR = High Range
*HP = High Performance
===BoraXEVB voltage selection settings===
BoraXEVB provides several configuration jumpers that allow to easily select the voltages used for PL's I/O banks. The following tables lists some of the allowed combinations used to select the most common voltage values. There are other combination available. However, '''some of them are not allowed and may cause permanent hardware damages to the Zynq part'''.
Since characteristics of PL's I/O banks differ between Zynq 7015 and 7030 parts, the valid combinations '''are not the same for all of the BoraX models'''. Please refer to the following sections for more details.
====Zynq 7030-based SOMs (default option for BXELK)====
====Zynq 7015-based SOMs====
==Block Diagram==
