Bureaucrats, dave_user, Administrators
4,650
edits
Changes
→Routing options
|}
==Routing options==[[BoraXEVB#SoM.27s_signals_mapping|This table]] helps to map Bora Lite's signals when it is mated with the [[BoraXEVB|BoraXEVB]] carrier board. '''That table assumes that the adapter is populated according to the default mounting option''', which is illustrated in the schematics available [[#Schematics|here]]. At the adapter level, other mounting options are available, however. Please refer to the [[#Schematics|schematics]] for more details. == CAN bus ==
Pins IO_L6P_T0_34 and IO_L19P_T3_34 can be used as CAN_TX and CAN_RX for the CAN0 interface. The BoraLite adapter provide the [http://www.ti.com/lit/ds/symlink/sn65hvd230.pdf SN65HVD232] CAN bus transceiver required for proper CAN bus bus interface.
The CAN_L and CAN_H translated signals are routed to the J5.103 and J5.105 connector pins on BoraXEVB.
==Technical documentation==
===Schematics===
* Orcad: [[mirror:bora/hw/BoraLiteADP/boralite-adapter_S-BLADP0000I0R-1.0.1-dsn.zip|boralite-adapter_S-BLADP0000I0R-1.0.1-dsn.zip]]
