Bootstrap settings (NaonEVB-Mid)
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Dip Switch settingsEdit
Bootstrap settings on NaonEVB-Mid can be changed by using S5/S6/S7 dip switch. Those switch changes BTMODE[4:0] accordingly with the following table.
| DIP SWITCH | OFF Position | ON Position |
|---|---|---|
| S5.1 | BTMODE0=1 | BTMODE0=0 |
| S5.2 | BTMODE1=1 | BTMODE1=0 |
| S6.1 | BTMODE2=1 | BTMODE2=0 |
| S6.2 | BTMODE3=1 | BTMODE3=0 |
| S7.1 | BTMODE4=1 | BTMODE4=0 |
Please note that S7.2 is RFU - that stands for "Reserved for future use" - and must not be selected.
ExamplesEdit
To configure the default boot sequence change the dip switch as follows
| DIP SWITCH | Position |
|---|---|
| S5.1 | OFF |
| S5.2 | OFF |
| S6.1 | OFF |
| S6.2 | ON |
| S7.1 | OFF |
| S7.2 | OFF |
To set the same configuration as default NaonEVB-Lite boot sequence, change the dip switch as follows
| DIP SWITCH | Position |
|---|---|
| S5.1 | ON |
| S5.2 | OFF |
| S6.1 | ON |
| S6.2 | ON |
| S7.1 | ON |
| S7.2 | OFF |