Changes

Jump to: navigation, search

Booting from NAND flash on i.MX6-based platforms

96 bytes added, 13:30, 16 October 2017
Test bed
==Test bed==
The test bed used in this example consists of an i.MX6SoloX-board equipped with a 512MB 8-bit asynchronous 1-bit ECC SLC NAND memory which is connected to the EIM bus of the SoC. The boot firmware image is the U-Boot bootloaderbinary file (<code>mx6sx_board_nand_u-boot.imx</code>). Its size is about 400 kB. From the point of view of MTD partitions, the boot partition is <code>mtd0</code> which is 8MB.
==Boot partition organization==
4,650
edits

Navigation menu