Changes

Jump to: navigation, search

Boot options (SDV04)

1,046 bytes added, 16:35, 11 March 2020
Created page with "{{InfoBoxTop}} {{Applies To SDVX}} {{InfoBoxBottom}} == System boot == The boot process begins at Power On Reset (POR) where the hardware reset logic forces the ARM core to..."
{{InfoBoxTop}}
{{Applies To SDVX}}
{{InfoBoxBottom}}

== System boot ==

The boot process begins at Power On Reset (POR) where the hardware reset logic forces the ARM core to begin execution starting from the on-chip boot ROM.

For the iMX6 processor and the selected boot mode on DAVE's SOMs, please find more information at [[Boot_options_(AxelLite) | Boot AxelLite]] and [[Booting_from_NAND_flash_on_i.MX6-based_platforms | Booting from NAND]] wiki pages.

== Boot switch ==

There is a specific 2x1x2.54mm pin header on the [[SDV04 | SDV04]] carrier board for selecting the storage boot device.

Inserting a jumper on the left position header, the internal storage device is selected as a primary boot device: i.e. NOR SPI or NAND flash.

[[File: SDV04-boot-NOR.jpg |thumb|center|600px| SDV04 boot from NOR/NAND]]

At the opposite, if it is not inserted, the external SD card (properly programmed and inserted into the microSD connector) is used as a primary boot device.

[[File: SDV04-boot-SD.jpg |thumb|center|600px| SDV04 boot from SD]]
8,142
edits

Navigation menu