Difference between revisions of "Boot options (SDV04)"
(Created page with "{{InfoBoxTop}} {{Applies To SDVX}} {{InfoBoxBottom}} == System boot == The boot process begins at Power On Reset (POR) where the hardware reset logic forces the ARM core to...") |
(Created page with "{{InfoBoxTop}} {{Applies To SDVX}} {{InfoBoxBottom}} == System boot == The boot process begins at Power On Reset (POR) where the hardware reset logic forces the ARM core to...") |
(No difference)
| |
Latest revision as of 16:35, 11 March 2020
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
System boot[edit | edit source]
The boot process begins at Power On Reset (POR) where the hardware reset logic forces the ARM core to begin execution starting from the on-chip boot ROM.
For the iMX6 processor and the selected boot mode on DAVE's SOMs, please find more information at Boot AxelLite and Booting from NAND wiki pages.
Boot switch[edit | edit source]
There is a specific 2x1x2.54mm pin header on the SDV04 carrier board for selecting the storage boot device.
Inserting a jumper on the left position header, the internal storage device is selected as a primary boot device: i.e. NOR SPI or NAND flash.
At the opposite, if it is not inserted, the external SD card (properly programmed and inserted into the microSD connector) is used as a primary boot device.
