BORA SOM/BORA Hardware/Peripherals/Programmable logic (FPGA)

From DAVE Developer's Wiki
Jump to: navigation, search
History
Issue Date Notes
2021/08/28 New documentation layout



Programmable logic[edit | edit source]

The following paragraphs describe in detail the available PL I/O pins and how they are routed to the Bora connectors. The Zynq-7000 AP SoC is split into I/O banks to allow for flexibility in the choice of I/O standards, thus each table reports one bank configuration. Moreover, Bora design allows carrier board to power two PL banks in order to achieve complete flexibility in terms of I/O voltage levels too. For more details about PCB design considerations, please refer to the Advanced routing and carrier board design guidelines article.

The following table reports the I/O banks characteristics:

FPGA Bank Type I/O Voltage Voltage Pins Notes
Bank 35 High range (HR) User defined
VIO=FPGA_VDDIO_BANK35
1.8 to 3.3V
J1.2
J1.66
J1.67
J1.68
Bank 34 High range (HR) Fixed
VIO=3.3 V
-
Bank 13 High range (HR) User defined
VIO=FPGA_VDDIO_BANK13
1.8 to 3.3V
J3.95
J3.96
J3.97
J3.98
J3.99
Bank 13 is available only with Zynq XC7Z020 part number. Although this bank is not available on Bora SOMs equipped with the XC7Z010 SOC, VDDIO_BANK13 pins must not be left open and must be connected anyway, either to ground or to an external I/O voltage.

Each user I/O is labeled IO_LXXY_Tn_ZZZ_ADi_#, where:

  • IO indicates a user I/O pin.
  • L indicates a differential pair, with XX a unique pair in the bank and Y = [P|N] for the positive/negative sides of the differential pair.
  • Tn indicates the memory byte group [0-3]
  • ZZZ indicates a MRCC, SRCC or DQS pin
  • ADi indicates a XADC (analog-to-digital converter) differential auxiliary analog input [0–15].
  • # indicates the bank number.

Highlighted rows are related to signals that are used for particular functions into the SOM.

FPGA Bank 34[edit | edit source]

The following table reports the available pins connected to bank 34:

Pin Name Conn. Pin Notes
IO_0_34 J2.69
IO_25_34 J2.67
IO_L10N_T1_34 J2.65
IO_L10P_T1_34 J2.63
IO_L11N_T1_SRCC_34 J2.59
IO_L11P_T1_SRCC_34 J2.57
IO_L12N_T1_MRCC_34 J2.62
IO_L12P_T1_MRCC_34 J2.60
IO_L13N_T2_MRCC_34 N.A.
IO_L13P_T2_MRCC_34 N.A.
IO_L14N_T2_SRCC_34 J2.56
IO_L14P_T2_SRCC_34 J2.54
IO_L15N_T2_DQS_34 J2.47
IO_L15P_T2_DQS_34 J2.45
IO_L16N_T2_34 J2.50
IO_L16P_T2_34 J2.48
IO_L17N_T2_34 J2.46
IO_L17P_T2_34 J2.44
IO_L18N_T2_34 J2.41
IO_L18P_T2_34 J2.39
IO_L19N_T3_VREF_34 J2.37
IO_L19P_T3_34 J2.35 Internally used as CAN_RX
IO_L1N_T0_34 J2.40
IO_L1P_T0_34 J2.38
IO_L20N_T3_34 J2.36
IO_L20P_T3_34 J2.34
IO_L21N_T3_DQS_34 J2.31
IO_L21P_T3_DQS_34 J2.29
IO_L22N_T3_34 J2.27
IO_L22P_T3_34 J2.25
IO_L23N_T3_34 J2.30
IO_L23P_T3_34 J2.28
IO_L24N_T3_34 J2.26
IO_L24P_T3_34 J2.24
IO_L2N_T0_34 J2.21
IO_L2P_T0_34 J2.19
IO_L3N_T0_DQS_34 J2.17
IO_L3P_T0_DQS_PUDC_B_34 J2.15 Internally connected to a 10kΩ pull-up
IO_L4N_T0_34 J2.20
IO_L4P_T0_34 J2.18
IO_L5N_T0_34 J2.16
IO_L5P_T0_34 J2.14
IO_L6N_T0_VREF_34 J2.11
IO_L6P_T0_34 J2.9 Internally used as CAN_TX
IO_L7N_T1_34 J2.10
IO_L7P_T1_34 J2.8
IO_L8N_T1_34 J2.7
IO_L8P_T1_34 J2.5
IO_L9N_T1_DQS_34 J2.6
IO_L9P_T1_DQS_34 J2.4

Regarding power voltage, take into consideration that Bank 34 is fixed at 3.3V.

Routing information[edit | edit source]

Routing implemented on Bora SoM allows the use of bank 34's signals as differential pairs as well as single-ended lines. Signals are grouped as denoted by the following table that details routing rules on Bora module. No carrier board guidelines can be provided, because these are application-dependent.

Pairs are highlighted with different colors. When used as differential pairs, differential impedence is 100 Ohm. When used as single-ended signals, impedence is 50 Ohm.

Bora pin name Individual trace length
[mils]
Intra-pair match
[mils]
Inter-pair match
[mils]
Group name
IO_L1N_T0_34 1751,37 25 300 BANK34 Diff group 1
IO_L1P_T0_34 1749,02 25 300 BANK34 Diff group 1
IO_L2N_T0_34 1625,68 25 300 BANK34 Diff group 1
IO_L2P_T0_34 1624,91 25 300 BANK34 Diff group 1
IO_L4N_T0_34 1581,72 25 300 BANK34 Diff group 1
IO_L4P_T0_34 1582,11 25 300 BANK34 Diff group 1
IO_L5N_T0_34 1769,81 25 300 BANK34 Diff group 1
IO_L5P_T0_34 1776,23 25 300 BANK34 Diff group 1
IO_L7N_T1_34 1566,52 25 300 BANK34 Diff group 1
IO_L7P_T1_34 1569,36 25 300 BANK34 Diff group 1
IO_L9N_T1_DQS_34 1490,25 25 300 BANK34 Diff group 1
IO_L9P_T1_DQS_34 1498,04 25 300 BANK34 Diff group 1
IO_L10N_T1_34 1516,97 25 300 BANK34 Diff group 1
IO_L10P_T1_34 1517,37 25 300 BANK34 Diff group 1
IO_L15N_T2_DQS_34 1610,74 25 300 BANK34 Diff group 1
IO_L15P_T2_DQS_34 1602,81 25 300 BANK34 Diff group 1
IO_L16N_T2_34 1601,55 25 300 BANK34 Diff group 1
IO_L16P_T2_34 1616,03 25 300 BANK34 Diff group 1
IO_L17N_T2_34 1574,33 25 300 BANK34 Diff group 1
IO_L17P_T2_34 1593,38 25 300 BANK34 Diff group 1
IO_L18N_T2_34 1740,11 25 300 BANK34 Diff group 1
IO_L18P_T2_34 1750,54 25 300 BANK34 Diff group 1
IO_L20N_T3_34 1588,01 25 300 BANK34 Diff group 1
IO_L20P_T3_34 1585,53 25 300 BANK34 Diff group 1
IO_L21N_T3_DQS_34 1567,1 25 300 BANK34 Diff group 1
IO_L21P_T3_DQS_34 1570,96 25 300 BANK34 Diff group 1
IO_L22N_T3_34 1619,26 25 300 BANK34 Diff group 1
IO_L22P_T3_34 1622,13 25 300 BANK34 Diff group 1
IO_L23N_T3_34 1769,71 25 300 BANK34 Diff group 1
IO_L23P_T3_34 1775,52 25 300 BANK34 Diff group 1
IO_L24N_T3_34 1772,07 25 300 BANK34 Diff group 1
IO_L24P_T3_34 1774,49 25 300 BANK34 Diff group 1
IO_L11N_T1_SRCC_34 1817,43 10 50 BANK34 xRCC group
IO_L11P_T1_SRCC_34 1823,9 10 50 BANK34 xRCC group
IO_L12N_T1_MRCC_34 1844,2 10 50 BANK34 xRCC group
IO_L12P_T1_MRCC_34 1841,36 10 50 BANK34 xRCC group
IO_L13N_T1_MRCC_34 1811,51 10 50 BANK34 xRCC group
IO_L13P_T1_MRCC_34 1818,58 10 50 BANK34 xRCC group
IO_L14N_T2_SRCC_34 1818,78 10 50 BANK34 xRCC group
IO_L14P_T2_SRCC_34 1822,02 10 50 BANK34 xRCC group

The following table lists other signals that are not explicitly routed as differential pairs. Please note that some of these signals are internally used and thus they may have stubs.

Bora pin name Trace length
[mils]
Stubs due to internal use
IO_0_34 1643,08 yes (total length including stubs: 1900,20 mils)
IO_25_34 1484,09 yes (total length including stubs: 1741,03 mils)
IO_L19N_T3_VREF_34 1880,62 yes (total length including stubs: 1959,35 mils)
IO_L19P_T3_34 1066,01 yes (total length including stubs: 1152,88 mils)
IO_L3N_T0_DQS_34 1050,49 yes (total length including stubs: 1133,5 mils)
IO_L3P_T0_DQS_PUDC_B_34 1201,39 yes (total length including stubs: 1385,82 mils)
IO_L6N_T0_VREF_34 1347,42 no
IO_L6P_T0_34 1583,33 yes (total length including stubs 1698,73: mils)
IO_L8N_T1_34 1518,79 yes (total length including stubs 1730,58: mils)
IO_L8P_T1_34 1212,67 yes (total length including stubs 1435,25: mils)

About power voltage, take into consideration that Bank 34 is fixed at 3.3V.

FPGA Bank 35[edit | edit source]

The following table reports the available pins connected to bank 35:

Pin Name Conn. Pin Notes
IO_0_35 J1.74
IO_25_35 J1.18
IO_L10N_T1_AD11N_35 J1.6
IO_L10P_T1_AD11P_35 J1.5
IO_L11N_T1_SRCC_35 J1.10
IO_L11P_T1_SRCC_35 J1.7
IO_L12N_T1_MRCC_35 J1.27
IO_L12P_T1_MRCC_35 J1.8
IO_L13N_T2_MRCC_35 J1.39
IO_L13P_T2_MRCC_35 J1.40
IO_L14N_T2_AD4N_SRCC_35 J1.36
IO_L14P_T2_AD4P_SRCC_35 J1.34
IO_L15N_T2_DQS_AD12N_35 J1.47
IO_L15P_T2_DQS_AD12P_35 J1.46
IO_L16N_T2_35 J1.44
IO_L16P_T2_35 J1.45
IO_L17N_T2_AD5N_35 J1.37
IO_L17P_T2_AD5P_35 J1.32
IO_L18N_T2_AD13N_35 J1.42
IO_L18P_T2_AD13P_35 J1.43
IO_L19N_T3_VREF_35 J1.64
IO_L19P_T3_35 J1.41
IO_L1N_T0_AD0N_35 J1.53
IO_L1P_T0_AD0P_35 J1.50
IO_L20N_T3_AD6N_35 J1.23
IO_L20P_T3_AD6P_35 J1.21
IO_L21N_T3_DQS_AD14N_35 J1.33
IO_L21P_T3_DQS_AD14P_35 J1.31
IO_L22N_T3_AD7N_35 J1.26
IO_L22P_T3_AD7P_35 J1.25
IO_L23N_T3_35 J1.22
IO_L23P_T3_35 J1.28
IO_L24N_T3_AD15N_35 J1.16
IO_L24P_T3_AD15P_35 J1.20
IO_L2N_T0_AD8N_35 J1.51
IO_L2P_T0_AD8P_35 J1.52
IO_L3N_T0_DQS_AD1N_35 J1.63
IO_L3P_T0_DQS_AD1P_35 J1.61
IO_L4N_T0_35 J1.54
IO_L4P_T0_35 J1.56
IO_L5N_T0_AD9N_35 J1.55
IO_L5P_T0_AD9P_35 J1.57
IO_L6N_T0_VREF_35 J1.62
IO_L6P_T0_35 J1.58
IO_L7N_T1_AD2N_35 J1.11
IO_L7P_T1_AD2P_35 J1.3
IO_L8N_T1_AD10N_35 J1.9
IO_L8P_T1_AD10P_35 J1.12
IO_L9N_T1_DQS_AD3N_35 J1.17
IO_L9P_T1_DQS_AD3P_35 J1.15


On Bora side, routing of bank 35 has been optimized to interface 16-bit DDR3 SDRAM memory devices, clocked at a maximum frequency of 400 MHz. Regarding power voltage, Bank 35 is configurable and must be powered by carrier board. Please note that some signals belonging to this bank can be configured alternatively as XADC auxiliary analog inputs. For routing details, please refer to PL Bank 35 routing.

Routing information[edit | edit source]

On Bora side, routing of bank 35 has been optimized to interface 16-bit DDR3 SDRAM memory devices, clocked at a maximum frequency of 400 MHz. Signals have been grouped in the following classes:

  • FDDR_ADDR
  • FDDR_CK
  • FDDR_BYTE0
  • FDDR_BYTE1

Some of them are differential pairs. These kind of signals are highlighted in dark grey in the following sections where, for each signal, detailed information are provided, related to routing rules implemented on Bora SoM and carrier board guidelines.

Following tables indicates general recommended rules for single-ended and differantial pairs on carrier board in terms of impedence and isolation.

Differential pairs:

Value UOM
Common Mode impedance typ 55 Ohm
Differential Mode impedance typ 100 Ohm
Isolation 4x gap

Single-ended signals:

Value UOM
Common Mode impedance typ 55 Ohm
Isolation 2x width

About power voltage, Bank 35 is configurable and must be powered by carrier board.

Please note that some signals belonging to this bank can be configured alternatively as XADC auxiliary analog inputs.

FDDR_ADDR class[edit | edit source]

Following table details routing rules implemented on Bora SoM and suggested carrier board guidelines for FDDR_ADDR class signals. The picture shows connection scheme and the nomenclature used in the table.

FDDR ADDR.png


Bora pin name Group name Carrier board net name SoM routing rules and specifications Carrier board guidelines
Actual length
[mils]
Max length match
[mils]
Nominal max length
[mils]
AD_A2 length match
[mils]
AD_AT length match
[mils]
AD_AS1 length match
[mils]
AD_AS1 max length
[mils]
AD_AT max length
[mils]
AD_A2+AD_AS1 max length
[mils]
IO_L17N_T2_AD5N_35 FDDR_ADDR FDDR_ADDR_3 1832 80 1912 40 100 50 60 400 2100
IO_L20P_T3_AD6P_35 FDDR_ADDR FDDR_BA_2 1853,4 80 1912 40 100 50 60 400 2100
IO_L16N_T2_35 FDDR_ADDR FDDR_ADDR_5 1832 80 1912 40 100 50 60 400 2100
IO_L18N_T2_AD13N_35 FDDR_ADDR FDDR_ADDR_1 1832 80 1912 40 100 50 60 400 2100
IO_L24N_T3_AD15N_35 FDDR_ADDR FDDR_CKE_0 1834,3 80 1912 40 100 50 60 400 2100
IO_L23P_T3_35 FDDR_ADDR FDDR_CAS_N 1857,01 80 1912 40 100 50 60 400 2100
IO_L14N_T2_AD4N_SRCC_35 FDDR_ADDR FDDR_ADDR_9 1832 80 1912 40 100 50 60 400 2100
IO_L24P_T3_AD15P_35 FDDR_ADDR FDDR_CS0_N 1832 80 1912 40 100 50 60 400 2100
IO_L14P_T2_AD4P_SRCC_35 FDDR_ADDR FDDR_ADDR_10 1832 80 1912 40 100 50 60 400 2100
IO_L15P_T2_DQS_AD12P_35 FDDR_ADDR FDDR_ADDR_8 1832 80 1912 40 100 50 60 400 2100
IO_L15N_T2_DQS_AD12N_35 FDDR_ADDR FDDR_ADDR_7 1832 80 1912 40 100 50 60 400 2100
IO_L12N_T1_MRCC_35 FDDR_ADDR FDDR_RESET_N 1832 80 1912 40 100 50 60 400 2100
IO_L13P_T2_MRCC_35 FDDR_ADDR FDDR_ADDR_12 1832 80 1912 40 100 50 60 400 2100
IO_L13N_T2_MRCC_35 FDDR_ADDR FDDR_ADDR_11 1832 80 1912 40 100 50 60 400 2100
IO_25_35 FDDR_ADDR FDDR_ODT_0 1832 80 1912 40 100 50 60 400 2100
IO_L23N_T3_35 FDDR_ADDR FDDR_WE_N 1869,66 80 1912 40 100 50 60 400 2100
IO_L17P_T2_AD5P_35 FDDR_ADDR FDDR_ADDR_4 1832 80 1912 40 100 50 60 400 2100
IO_L22N_T3_AD7N_35 FDDR_ADDR FDDR_RAS_N 1832 80 1912 40 100 50 60 400 2100
IO_L20N_T3_AD6N_35 FDDR_ADDR FDDR_BA_1 1832 80 1912 40 100 50 60 400 2100
IO_L18P_T2_AD13P_35 FDDR_ADDR FDDR_ADDR_2 1853,7 80 1912 40 100 50 60 400 2100
IO_L16P_T2_35 FDDR_ADDR FDDR_ADDR_6 1832 80 1912 40 100 50 60 400 2100
IO_L22P_T3_AD7P_35 FDDR_ADDR FDDR_BA_0 1850,82 80 1912 40 100 50 60 400 2100
IO_L19P_T3_35 FDDR_ADDR FDDR_ADDR_0 1836,73 80 1912 40 100 50 60 400 2100
FDDR_CK class[edit | edit source]

Following table details routing rules implemented on Bora SoM and suggested carrier board guidelines for FDDR_CK class signals. The picture shows connection scheme and the nomenclature used in the table.

FDDR CK.png
Bora pin name Group name Carrier board net name SoM routing rules and specifications Carrier board guidelines
Actual length
[mils]
Intra-pair match
[mils]
Max length match (with respect to FDDR_ADDR group)
[mils]
Nominal max length
[mils]
Intra-pair match
[mils]
CK_A2 pair match (with respect to FDDR_ADDR)
[mils]
CK_AT intra-pair match
[mils]
CK_AS1 match (with respect to FDDR_ADDR)
[mils]
CK_AS1 max length
[mils]
CK_AT maximum length
[mils]
CK_AT pair match (with respect to FDDR_ADDR)
[mils]
CK_A2+CK_AS1 max length
[mils]
IO_L21P_T3_DQS_AD14P_35 FDDR_CK FDDR_CK_P0 1900,39 5 80 1912 10 40 5 50 60 400 100 2100
IO_L21N_T3_DQS_AD14N_35 FDDR_CK FDDR_CK_N0 1898,17 5 80 1912 10 40 5 50 60 400 100 2100
FDDR_BYTE0 class[edit | edit source]

Following table details routing rules implemented on Bora SoM and suggested carrier board guidelines for FDDR_BYTE0 class signals.

Pin Name Group name Carrier board net name SoM routing rules and specifications Carrier board guidelines
Actual length
[mils]
Max length match
[mils]
Max inter-pair match length on SOM
[mils]
Nominal max length
[mils]
Group match (mandatory)
[mils]
Intra-pair match (mandatory)
[mils]
Max length
[mils]
IO_L2N_T0_AD8N_35 FDDR_BYTE0 FDDR_DQ_2 1222,66 15 - 1230 25 - CK_A2+CK_AS1(max)
IO_L6P_T0_35 FDDR_BYTE0 FDDR_DQ_7 1219,68 15 - 1230 25 - CK_A2+CK_AS1(max)
IO_L5P_T0_AD9P_35 FDDR_BYTE0 FDDR_DQ_5 1226,42 15 - 1230 25 - CK_A2+CK_AS1(max)
IO_L4P_T0_35 FDDR_BYTE0 FDDR_DQ_3 1219,68 15 - 1230 25 - CK_A2+CK_AS1(max)
IO_L2P_T0_AD8P_35 FDDR_BYTE0 FDDR_DQ_1 1219,68 15 - 1230 25 - CK_A2+CK_AS1(max)
IO_L1N_T0_AD0N_35 FDDR_BYTE0 FDDR_DQ_0 1219,68 15 - 1230 25 - CK_A2+CK_AS1(max)
IO_L4N_T0_35 FDDR_BYTE0 FDDR_DQ_4 1219,68 15 - 1230 25 - CK_A2+CK_AS1(max)
IO_L5N_T0_AD9N_35 FDDR_BYTE0 FDDR_DQ_6 1219,68 15 - 1230 25 - CK_A2+CK_AS1(max)
IO_L1P_T0_AD0P_35 FDDR_BYTE0 FDDR_DM_0 1219,68 15 - 1230 25 - CK_A2+CK_AS1(max)
IO_L3P_T0_DQS_AD1P_35 FDDR_BYTE0 FDDR_DQS_P0 1221,04 15 5 1230 25 5 CK_A2+CK_AS1(max)
IO_L3N_T0_DQS_AD1N_35 FDDR_BYTE0 FDDR_DQS_N0 1219,42 15 5 1230 25 5 CK_A2+CK_AS1(max)
FDDR_BYTE1 class[edit | edit source]

Following table details routing rules implemented on Bora SoM and suggested carrier board guidelines for FDDR_BYTE1 class signals.

Pin Name Group name Carrier board net name SoM routing rules and specifications Carrier board guidelines
Actual length
[mils]
Max length match
[mils]
Max inter-pair match length on SOM
[mils]
Nominal max length
[mils]
Group match (mandatory)
[mils]
Intra-pair match (mandatory)
[mils]
Max length
[mils]
IO_L10N_T1_AD11N_35 FDDR_BYTE1 FDDR_DQ_12 1345,93 15 - 1355 20 - CK_A2+CK_AS1(max)
IO_L10P_T1_AD11P_35 FDDR_BYTE1 FDDR_DQ_11 1345,93 15 - 1355 20 - CK_A2+CK_AS1(max)
IO_L11P_T1_SRCC_35 FDDR_BYTE1 FDDR_DQ_13 1353,43 15 - 1355 20 - CK_A2+CK_AS1(max)
IO_L12P_T1_MRCC_35 FDDR_BYTE1 FDDR_DQ_15 1341,3 15 - 1355 20 - CK_A2+CK_AS1(max)
IO_L11N_T1_SRCC_35 FDDR_BYTE1 FDDR_DQ_14 1340 15 - 1355 20 - CK_A2+CK_AS1(max)
IO_L8P_T1_AD10P_35 FDDR_BYTE1 FDDR_DQ_9 1340 15 - 1355 20 - CK_A2+CK_AS1(max)
IO_L7N_T1_AD2N_35 FDDR_BYTE1 FDDR_DQ_8 1340 15 - 1355 20 - CK_A2+CK_AS1(max)
IO_L8N_T1_AD10N_35 FDDR_BYTE1 FDDR_DQ_10 1340 15 - 1355 20 - CK_A2+CK_AS1(max)
IO_L7P_T1_AD2P_35 FDDR_BYTE1 FDDR_DM_1 1345,93 15 - 1355 20 - CK_A2+CK_AS1(max)
IO_L9P_T1_DQS_AD3P_35 FDDR_BYTE1 FDDR_DQS_P1 1354,26 15 5 1355 20 5 CK_A2+CK_AS1(max)
IO_L9N_T1_DQS_AD3N_35 FDDR_BYTE1 FDDR_DQS_N1 1350,66 15 5 1355 20 5 CK_A2+CK_AS1(max)

VREF[edit | edit source]

Recommendations:

  • use a "T" connection as shown by following picture
  • use 20+ mils trace
  • place bypass capacitors as close as possible to power balls.
VREF.png

Other signals[edit | edit source]

The following table lists other signals that do not follow specific routing rules.

Bora pin name Trace length
[mils]
IO_0_35 1171,03
IO_L19N_T3_VREF_35 2053,07
IO_L6N_T0_VREF_35 2295,83
Related Xilinx documentation[edit | edit source]

FPGA Bank 13 (Zynq 7020 only)[edit | edit source]

N.B. Although BANK 13 is not available on Bora SOMs equipped with the XC7Z010 SOC, VDDIO_BANK13 pins must not be left open and must be connected anyway, either to ground or to an external I/O voltage as described in I/O banks table.

The following table reports the available pins connected to bank 13:

Pin Name Conn. Pin Notes
IO_L11N_T1_SRCC_13 J3.136
IO_L11P_T1_SRCC_13 J3.134
IO_L12N_T1_MRCC_13 J3.137
IO_L12P_T1_MRCC_13 J3.135
IO_L13N_T2_MRCC_13 J3.130
IO_L13P_T2_MRCC_13 J3.128
IO_L14N_T2_SRCC_13 J3.131
IO_L14P_T2_SRCC_13 J3.129
IO_L15N_T2_DQS_13 J3.124
IO_L15P_T2_DQS_13 J3.122
IO_L16N_T2_13 J3.125
IO_L16P_T2_13 J3.123
IO_L17N_T2_13 J3.118
IO_L17P_T2_13 J3.116
IO_L18N_T2_13 J3.119
IO_L18P_T2_13 J3.117
IO_L19N_T3_VREF_13 J3.113
IO_L19P_T3_13 J3.111
IO_L20N_T3_13 J3.112
IO_L20P_T3_13 J3.110
IO_L21N_T3_DQS_13 J3.107
IO_L21P_T3_DQS_13 J3.105
IO_L22N_T3_13 J3.106
IO_L22P_T3_13 J3.104
IO_L6N_T0_VREF_13 J3.100

Regarding power voltage, Bank 13 is configurable and must be powered by carrier board. For routing details, please refer to PL Bank 13 routing.

Routing information[edit | edit source]

Routing implemented on Bora SoM allows the use of bank 13's signals as differential pairs as well as single-ended lines. Signals are grouped as denoted by the following table that details routing rules on Bora module. No carrier board guidelines can be provided, because these are application-dependent.

Pairs are highlighted with different colors. When used as differential pairs, differential impedence is 100 Ohm. When used as single-ended signals, impedence is 50 Ohm.

Bora pin name Individual net length
[mils]
Intra-pair match
[mils]
Inter-pair match
[mils]
Group Name
IO_L15N_T2_DQS_13 1582,37 25 200 BANK13 Diff group 1
IO_L15P_T2_DQS_13 1602,37 25 200 BANK13 Diff group 1
IO_L16N_T2_13 1589,32 25 200 BANK13 Diff group 1
IO_L16P_T2_13 1602,33 25 200 BANK13 Diff group 1
IO_L17N_T2_13 1710,41 25 200 BANK13 Diff group 1
IO_L17P_T2_13 1722,73 25 200 BANK13 Diff group 1
IO_L18N_T2_13 1720,53 25 200 BANK13 Diff group 1
IO_L18P_T2_13 1712,11 25 200 BANK13 Diff group 1
IO_L19N_T3_VREF_13 1585,55 25 200 BANK13 Diff group 1
IO_L19P_T3_13 1602,96 25 200 BANK13 Diff group 1
IO_L20N_T3_13 1623,95 25 200 BANK13 Diff group 1
IO_L20P_T3_13 1626,27 25 200 BANK13 Diff group 1
IO_L21N_T3_DQS_13 1661,55 25 200 BANK13 Diff group 1
IO_L21P_T3_DQS_13 1668,95 25 200 BANK13 Diff group 1
IO_L22N_T3_13 1592,18 25 200 BANK13 Diff group 1
IO_L22P_T3_13 1577,63 25 200 BANK13 Diff group 1
IO_L11N_T1_SRCC_13 1702,04 10 50 BANK13 xRCC group
IO_L11P_T1_SRCC_13 1705,07 10 50 BANK13 xRCC group
IO_L12N_T1_MRCC_13 1704,42 10 50 BANK13 xRCC group
IO_L12P_T1_MRCC_13 1703,11 10 50 BANK13 xRCC group
IO_L13N_T2_MRCC_13 1731,33 10 50 BANK13 xRCC group
IO_L13P_T2_MRCC_13 1732,15 10 50 BANK13 xRCC group
IO_L14N_T2_SRCC_13 1710,12 10 50 BANK13 xRCC group
IO_L14P_T2_SRCC_13 1716,36 10 50 BANK13 xRCC group

Other signals[edit | edit source]

The following table lists other signals that do not follow specific routing rules.

Bora pin name Trace length
[mils]
IO_L6N_T0_VREF_13 1098,15