BORA Lite SOM/BORA Lite Evaluation Kit/Getting started/Boot Configurations
< BORA Lite SOM | BORA Lite Evaluation Kit
Revision as of 17:12, 25 January 2021 by U0007 (talk | contribs) (Created page with "{{#lst:BoraXEVB|Boot Configurations}}")
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Boot mode selection - S5[edit | edit source]
S5 is a dip-switch for the boot mode selection. The following table reports the available options and the related configurations:
| S5.1 | S5.2 | S5.3 | S5.4 | S5.5 | S5.6 | S5.7 | S5.8 | |
|---|---|---|---|---|---|---|---|---|
| SPI-NOR | OFF | ON | OFF | ON | ON | ON | ON | OFF |
| SD-card | OFF | ON | OFF | ON | ON | OFF | ON | OFF |
| NAND (*) | OFF | ON | OFF | ON | ON | OFF | ON | ON |
| JTAG | OFF | ON | OFF | ON | ON | ON | ON | ON |
(*) Boot mode from NAND in supported ONLY on BORA Lite SOM module
