Bureaucrats, dave_user, Administrators
8,157
edits
Changes
→Target setup and first boot
{{Applies To Bora}}
{{Applies To BoraX}}
{{Applies To BoraLite}}
{{InfoBoxBottom}}
[[File:BoraEVB-first-boot.jpg|thumb|center|600px|BELK target setup for first boot]][[File:BoraX-BoraXEVB-1st-boot.jpg|thumb|center|600px|BXELK Bora+BoraEVB target setup for first boot]]
[[File:BoraX-BoraXEVB-1st-boot.jpg|thumb|center|600px|BoraX+BoraXEVB target setup for first boot]] <span id="BoraX-BoraXEVB-Lite"></span>[[File:BoraXEVB-BoraLite.jpg|thumb|center|600px|Bora Lite+Adapter+BoraXEVB target setup for first boot]] Once power has been applied to the target, FSBL or U-boot SPL and U-Boot bootloaders will be fetched from the SPI NOR flash that equips Bora/BoraX /BORA Lite SOM and executed. Boot messages will be printed out to the serial console. Redundant U-Boot environment is stored in the NOR flash as well, as depicted in the following image.
===Recovery procedure===
In case the target is not able to boot from NOR or NAND flash for any reason, this [[System_boot_and_recovery_via_microSD_card_(BELK/BXELK)|recovery procedure]] can be use to boot from microSD card.
