Bureaucrats, dave_user, Administrators
8,182
edits
Changes
→Target configuration for the development stage (net_nfs)
{{ImportantMessage|text='''Customers are strongly recommended to register their kits'''. Registration grants access to reserved material such as source code and additional documentation.
To register the kit, please send an email to [mailto:support-borahelpdesk@dave.eu support-borahelpdesk@dave.eu], [[Development_Kits_Identification_Codes|providing the kit P/N and S/N]].
If you also wish to access git repositories containing source code, please follow the procedure described [[Accessing_DAVE_Embedded_Systems_restricted_git_repositories|here]].}}
<section begin=Connections and first boot/>
===Target setup and first boot===
[[File:BoraEVB-first-boot.jpg|thumb|center|600px|BELK Bora+BoraEVB target setup for first boot]] [[File:BoraX-BoraXEVB-1st-boot.jpg|thumb|center|600px|BXELK target setup for first boot]][[File:BoraX-+BoraXEVB-Lite-1st-boot.jpg|thumb|center|600px|BXELK BORA Lite target setup for first boot]]
<span id="BoraX-BoraXEVB-Lite"></span>
[[File:BoraXEVB-BoraLite.jpg|thumb|center|600px|Bora Lite+Adapter+BoraXEVB target setup for first boot]]
Once power has been applied to the target, FSBL or U-boot SPL and U-Boot bootloaders will be fetched from the SPI NOR flash that equips Bora/BoraX /BORA Lite SOM and executed. Boot messages will be printed out to the serial console. Redundant U-Boot environment is stored in the NOR flash as well, as depicted in the following image.
[3] The microSD card is bootable itself, as explained [[System_boot_and_recovery_via_microSD_card_(BELK/BXELK)|here]].
<section end=Connections and first boot/>
===Host setup and target software development===
Please refer to [[Host setup and development flow (BXELK)|this page]].
<section begin=Target configuration/>
===Target configuration for the development stage (<code>net_nfs</code>)===
In DAVE Embedded Systems development kits, this configuration is generally denoted as <code>net_nfs</code>. U-Boot bootloader supports this configuration. Some U-Boot environment variables are needed to set it up.
For more information about how to set up and use TFTP and NFS servers, please refer to the following link [[Booting_the_system_via_NFS_(BORA_SOM/BELK-L/BXELK)General/Booting_from_NFS|Booting the system via NFS (BELK/BXELK)nfs]].<section end=Target configuration/>
===Target configuration for standalone boot===
===Recovery procedure===
In case the target is not able to boot from NOR or NAND flash for any reason, this [[System_boot_and_recovery_via_microSD_card_(BELK/BXELK)|recovery procedure]] can be use to boot from microSD card.
