Bureaucrats, dave_user, Administrators
8,154
edits
Changes
→Kit registration
{{Applies To Bora}}
{{Applies To BoraX}}
{{Applies To BoraLite}}
{{InfoBoxBottom}}
{{ImportantMessage|text='''Customers are strongly recommended to register their kits'''. Registration grants access to reserved material such as source code and additional documentation.
To register the kit, please send an email to [mailto:support-borahelpdesk@dave.eu support-borahelpdesk@dave.eu], [[Development_Kits_Identification_Codes|providing the kit P/N and S/N]].
If you also wish to access git repositories containing source code, please follow the procedure described [[Accessing_DAVE_Embedded_Systems_restricted_git_repositories|here]].}}
[[File:BoraEVB-first-boot.jpg|thumb|center|600px|BELK target setup for first boot]][[File:BoraX-BoraXEVB-1st-boot.jpg|thumb|center|600px|BXELK Bora+BoraEVB target setup for first boot]]
[[File:BoraX-BoraXEVB-1st-boot.jpg|thumb|center|600px|BoraX+BoraXEVB target setup for first boot]] <span id="BoraX-BoraXEVB-Lite"></span>[[File:BoraXEVB-BoraLite.jpg|thumb|center|600px|Bora Lite+Adapter+BoraXEVB target setup for first boot]] Once power has been applied to the target, FSBL or U-boot SPL and U-Boot bootloaders will be fetched from the SPI NOR flash that equips Bora/BoraX /BORA Lite SOM and executed. Boot messages will be printed out to the serial console. Redundant U-Boot environment is stored in the NOR flash as well, as depicted in the following image.
===Recovery procedure===
In case the target is not able to boot from NOR or NAND flash for any reason, this [[System_boot_and_recovery_via_microSD_card_(BELK/BXELK)|recovery procedure]] can be use to boot from microSD card.
