Changes

BELK-TN-012: Using XADC signal module

13 bytes added, 14:39, 22 December 2021

→‎Pins usage

</pre>

then, the related ADC channel can be read - from <code>sysfs</code> with the analog value reported in the form raw/scale:

<pre>

root@bora:~# cat /sys/devices/soc0/amba.1/f8007100.adc/iio\:device0/in_voltage0_vccint_raw

1348

root@bora:~# cat /sys/devices/soc0/amba.1/f8007100.adc/iio\:device0/in_voltage0_vccint_scale

0.732421875

root@bora:~#

<pre>

root@bora:~# cat /sys/devices/soc0/amba.1/f8007100.adc/iio\:device0/in_temp0_raw

2660

root@bora:~# cat /sys/devices/soc0/amba.1/f8007100.adc/iio\:device0/in_temp0_offset

-2219

root@bora:~# cat /sys/devices/soc0/amba.1/f8007100.adc/iio\:device0/in_temp0_scale

123.040771484

root@bora:~#

8,226

edits