|1.0.01|Sep 2020Jul 2021|First public release[[BELK/BXELK software components#BELK 4.1.4|4.1.4]]|BELK update 4.1.4
|}
The u-boot ''devel'' version can be used for the application purposes: in this application note we used the new u-boot release with the following files:
SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 32 MiB
In: serial@e0001000
Out: serial@e0001000
Model: Bora
Board: Xilinx Zynq
SF: Detected s25fl128s_64k s25fl256s_64k with page size 256 Bytes, erase size 64 KiB, total 32 MiBWARNING: ConfigID on block 0 is UNLOCKEDSF: Detected s25fl128s_64k s25fl256s_64k with page size 256 Bytes, erase size 64 KiB, total 32 MiBSOM ConfigID#: 0000000600000001SOM UniqueID#: 3a12db0801234567:32291263ds2431_readmem89abcdefds2431_readmem(): error in chip reset
ds2431_readmem(): error in reading buffer
ds2431_readmem(): error in chip reset
CB ConfigID#: ffffffff
CB UniqueID#: 00000000:00000000
SF: Detected s25fl128s_64k s25fl256s_64k with page size 256 Bytes, erase size 64 KiB, total 32 MiBWarning: ethaddr not found in SPI NOR : CRC mismatch for 0x0000000000000000 (was 0x00000000, expected 0x6522df69) at block 8
Hit ENTER within 3 0 seconds to stop autobootBora> pri ethaddrethaddr=00:50:c2:1e:af:ec
Bora>
</pre>
The Bora [https://wiki.dave.eu/index.php/Building_U-Boot_(BELK/BXELK) Building_U-Boot] wiki page describes how to keep updated with DAVE's git repository and build the required u-boot version.
The binaries used in this AN can be found into our [https[mirror://mirror.dave.eu/bora/belk-4.1.24/ |mirror server]]