767
edits
Changes
no edit summary
|}
The Vivado project can be downloaded from this '''TBD'''[http://www.dave.eu/system/files/area-riservata/AN-BELK-004-Interfacing-to-LCD-display.zip link]
(*) This signal is used to control backlight. It is usually driven by a PWM signal whose duty cycle is proportional to backlight intensity. For the sake of simplicity, in this project this signal is driven by a GPIO, thus only two intensity levels are supported (0% and 100%). This is a CMOS 2.5V level signal. Make sure that voltage levels of this signal are compatible with LCD backlight input.
To enable frame buffer driver user needs to:
* for Bora get the pre-built binaries [http://www.dave.eu/system/files/area-riservata/AN-BELK-004-sw_0.zip here].
* for BoraX get the pre-built binaries '''TBD'''[http://www.dave.eu/system/files/area-riservata/AN-BELK-004-Interfacing-to-LCD-display.zip here]
Kernel and device tree can also be built with the following procedure:
