Bureaucrats, dave_user, Administrators
4,650
edits
Changes
→Enabling frame buffer driver in linux kernel
==Enabling frame buffer driver in linux kernel==
To enable frame buffer driver user need needs to:* get the pre-built binaries from TBD[http://www.dave.eu/system/files/area-riservata/AN-BELK-004-sw_0.zip|here].
Kernel and device tree can also be build built with the following procedure:
* update Bora kernel repository (as described [[Bora_Embedded_Linux_Kit_(BELK)#Updating_the_repositories_from_BELK_2.1.0_to_BELK_2.2.0|here]])
* checkout ''bora-feat-lcd-support'' branch (using ''git checkout bora-feat-lcd-support'' command)
* build the updated kernel source as usual.
Put the binaries on the first (FAT32) partition of your BELK 2.2.0 SD card, overwriting the original one when if needed. Please note that you need the following files:
* boot.bin
* bora.dtb
