Bureaucrats, dave_user, Administrators
4,650
edits
Changes
→Target setup and first boot
The microSD provided with the XELK can be used to boot the system, since it contains a bootable partition (<code>mmcblk0p1</code>) and a root file system partition (<code>mmcblk0p2</code>).
#Insert the MicroSD card provided with the development kit into the microSD slot
#Connect the 12Vcc 12V power supply to the JP2 socket on the DACU board#(optional) To access the serial console:#*Connect a serial cable between the J251 connector on the DACU board and PC COM port through a NULLnull-modem (https://en.wikipedia.org/wiki/Null_modem) cable (not provided)#(optional) start *Start your favorite terminal software on PChist side; communication parameters are:#**Baud rate: 115200 Bps#**Data bits: 8#**Stop bits: 1#**Parity: none#(optional) to To connect the system to Ethernet LAN, please plug cable on connector J6 connector of the AXELEVB-LiteThe system is configured to boot automatically from the SD card when powered up.
==Related Documents ==
