Bureaucrats, dave_user, Administrators
4,650
edits
Changes
→Notes
* Freescale Linux BSP: L3.0.35-4.1.0
* Supported carrier boards: AxelEVB-Lite on Dacu
==== Quick start guide ====
This chapter describes how to quickly start working with the XELK kit. The following paragraphs will guide you through the setup and installation procedures.
===Kit registration===
{{ImportantMessage|text='''Customers are strongly recommended to register their kits'''. Registration grants access to reserved material such as source code and additional documentation.
To register the kit, please send an email to [mailto:support-axel@dave.eu support-axel@dave.eu], [[Development_Kits_Identification_Codes|providing the kit P/N and S/N]].}}
If you also wish to access git repositories containing source code, please follow the procedure described [[Accessing_DAVE_Embedded_Systems_restricted_git_repositories|here]].}}
===Target setup and first boot===
This section describes how to quick start the AxelEVB board delivered along with XELK kit (see also the following image). The hardware setup is the same for AxelUltra and AxelLite SOMs.
[[File:AxelUltra-AxelEVB.jpg|thumb|center|600px|Axel Ultra/AxelEVB setup]]
The microSD provided with the XELK can be used to boot the system, since it contains a bootable partition (<code>mmcblk0p1</code>) and a root file system partition (<code>mmcblk0p2</code>).
#Insert the MicroSD card provided with the development kit into the microSD slot
#Connect the 12Vcc power supply to JP2 on the DACU board
#(optional) Connect a serial cable between the J251 connector on the DACU board and PC COM port through a NULL-modem
(https://en.wikipedia.org/wiki/Null_modem) cable (not
provided)
#(optional) start your favorite terminal software on PC;
communication parameters are:
#(optional) to connect the system to Ethernet LAN,
please plug cable on connector J6 connector of the
AXELEVB-Lite
The system is configured to boot automatically from the SD
card when powered up.
<pre class="mw-collapsible mw-collapsed">
</pre>
==== Notes ====
