In this case, it is required to use the [[AxelEVB-Lite-Adapter (AxelLite)|specific revision 0 adapter]] to plug the SoM. This adapter provides a dip switch that allows selecting Regarding the boot device according options, please refer to the following table. The available boot options differ depending on the Axel [[AxelEVB-Lite type. In -Adapter_(AxelLite)#Revision_0_2|this regard, there are basically two types: those that are equipped with both NOR and NAND flash, and those that are equipped with NAND flash onlysection]].{| class=="wikitable"|+! rowspanTechnical documents="2" |Axel Lite type! colspan="2" |S1.2position|-!on!off|-|NOR and NAND flash|USB|SPI|-|NAND flash only|SD|NAND|}It is worth remembering that, when using Axel Lite in combination with AxelEVB-Lite revision 0, the S5, S6, S7, S8, and S9 switches of the carrier board don't affect the boot options.

===Schematics===

* ORCAD: http://mirror.dave.eu/axel/hw/AxelEVB/XELKrev-2.0.0/axelevb-lite-0.9.4-XELK-dsn.zip* PDF: http://mirror.dave.eu/axel/hw/AxelEVB/XELKrev-2.0.0/axelevb-lite-S.EVBA1000C0R.0.9.4.pdf

===BOM===* AxelEVB-Lite: http://mirror.dave.eu/axel/hw/AxelEVB/XELKrev-2.0.0/axelevb-lite_BOM_S.EVBA1000C0R_0.9.4.CSV_.zip

===Layout===* http://mirror.dave.eu/axel/hw/AxelEVB/XELKrev-2.0.0/axelevb-lite_CS151613_assem_view.pdf

===Mechanicaldrawings===* DXF: http://mirror.dave.eu/axel/hw/AxelEVB/XELKrev-2.0.0/axelevb-lite_3D_CS151613.zip