Difference between revisions of "AxelEVB-Lite-Adapter (AxelLite)"
(→Revision 0) |
|||
| (14 intermediate revisions by 2 users not shown) | |||
| Line 14: | Line 14: | ||
* routes the signals from the AxelLite pins to the AxelEVB-Lite mating connectors | * routes the signals from the AxelLite pins to the AxelEVB-Lite mating connectors | ||
| − | {{ImportantMessage|text= | + | {{ImportantMessage|text=There are two versions of the adapter. Revision 0 is used in combination with the [[AxelEVB-Lite_rev.0|AxelEVB-Lite revision 0]]. Revision A is used in combination with the [[AxelEVB-Lite|AxelEVB-Lite revision A]].}} |
| − | The following images show the top and bottom views of the AxelEVB-Lite-Adapter: | + | ===Revision 0=== |
| + | The following images show the top and bottom views of the AxelEVB-Lite-Adapter revision 0: | ||
| − | [[Image:Axellite-adapter- | + | [[Image:Axellite-adapter-top1.jpg|thumb|none|border|350px|Top view]] |
[[Image:Axellite-adapter-bottom.jpg|thumb|none|border|350px|Bottom view]] | [[Image:Axellite-adapter-bottom.jpg|thumb|none|border|350px|Bottom view]] | ||
| + | |||
| + | ===Revision A=== | ||
| + | The following images show the top and bottom views of the AxelEVB-Lite-Adapter revision A: | ||
| + | |||
| + | [[Image:Axellite-adapter-rev.A-top.jpg|thumb|none|border|350px|Top view]] | ||
| + | [[Image:Axellite-adapter-rev.A-bottom.jpg|thumb|none|border|350px|Bottom view]] | ||
== Connectors' pinout == | == Connectors' pinout == | ||
| Line 65: | Line 72: | ||
== Boot mode selection == | == Boot mode selection == | ||
| + | The following sections detail how to select the boot option depending on the adapter's revision. | ||
| − | + | For further details, please refer to [[Boot_options_(AxelLite) | this page]], which describes the available boot modes thoroughly. | |
| − | + | ===Revision 0=== | |
| − | === | + | This adapter provides a switch that allows selecting the boot device according to the following table. The available boot options differ depending on the Axel Lite type. In this regard, there are basically two types: those that are equipped with both NOR and NAND flash, and those that are equipped with NAND flash only. |
| − | + | {| class="wikitable" | |
| − | {| class="wikitable" | + | |+ |
| + | ! rowspan="2" |Axel Lite type | ||
| + | ! colspan="2" |S1.2 | ||
| + | position | ||
|- | |- | ||
| − | ! | + | !on |
| − | ! | + | !off |
| − | |||
| − | |||
|- | |- | ||
| − | | | + | |NOR and NAND flash |
| − | + | |microSD card | |
| − | + | |NOR flash | |
| − | | | ||
| − | | | ||
|- | |- | ||
| + | |NAND flash only | ||
| + | |microSD card | ||
| + | |NAND flash | ||
|} | |} | ||
| + | It is worth remembering that, when using Axel Lite in combination with AxelEVB-Lite revision 0, the S5, S6, S7, S8, and S9 switches of the carrier board don't affect the boot options. | ||
| + | ===Revision A=== | ||
| + | Revision A does not integrate any switch. To select the boot source, please use the S9.2 switch provided by the [[AxelEVB-Lite#Boot_configurations|AxelEVB-Lite rev. A]] board instead. | ||
| − | + | The selectable boot options differ depending on the Axel Lite type. In this regard, there are basically two types: those that are equipped with both NOR and NAND flash, and those that are equipped with NAND flash only. | |
| − | {| class="wikitable" | + | {| class="wikitable" |
| + | |+ | ||
| + | ! rowspan="2" |Axel Lite type | ||
| + | ! colspan="2" |S9.2 | ||
| + | position | ||
|- | |- | ||
| − | ! | + | !on |
| − | ! | + | !off |
| − | |||
| − | |||
|- | |- | ||
| − | | | + | |NOR and NAND flash |
| − | | | + | |microSD card |
| − | | | + | |NOR flash |
| − | |||
| − | |||
|- | |- | ||
| + | |NAND flash only | ||
| + | |microSD card | ||
| + | |NAND flash | ||
|} | |} | ||
| − | == | + | ==Technical documentation== |
| − | + | === Revision 0 === | |
| − | === | + | ====Schematics==== |
| − | ==== | + | * Orcad: http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-0/axelevb-lite-adapter-CS010214_S.XLADP0000I0R.0.9.1.dsn__0.zip |
| − | * Orcad: | + | * PDF: http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-0/axelevb-lite-adapter-CS010214_S.XLADP0000I0R.0.9.1-color.pdf |
| − | * PDF: | + | ====BOM==== |
| − | ==== | + | * http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-0/axelevb-lite-adapter-CS010214_S.XLADP0000I0R.0.9.1.BOM_.csv__0.zip |
| − | * | + | ====Layout==== |
| − | + | * http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-0/axelevb-lite-adapter-CS010214_Assem.pdf | |
| − | + | ====Mechanical Drawings ==== | |
| − | + | *DXF (2D): http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-0/axelevb-lite-adapter-CS010214-DXF.zip | |
| − | + | *IDF (3D): http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-0/axelevb-lite-adapter-CS010214-IDF.zip | |
| − | |||
| − | ==== | ||
| − | * | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | ==== | ||
| − | * | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | * | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | == | + | === Revision A === |
| − | * DXF (2D): | + | ====Schematics==== |
| − | * IDF (3D): | + | * Orcad: http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-A/axelevb-lite-adapter-CS010214A_S.XLADP0000I0R.1.0.0.dsn__0.zip |
| + | * PDF: http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-A/axelevb-lite-adapter-CS010214A_S.XLADP0000I0R.1.0.0-color_0.pdf | ||
| + | ====BOM==== | ||
| + | * http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-A/axelevb-lite-adapter-CS010214A_S.XLADP0000I0R.1.0.0.BOM_.csv__0.zip | ||
| + | ====Layout==== | ||
| + | * http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-A/axelevb-lite-adapter-CS010214A_assem_view_0.pdf | ||
| + | ====Mechanical Drawings ==== | ||
| + | * DXF (2D): http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-A/axelevb-lite-adapter-CS010214A-DXF.zip | ||
| + | * IDF (3D): http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-A/axelevb-lite-adapter-CS010214A-IDF.zip | ||
Revision as of 15:23, 3 December 2019
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Introduction[edit | edit source]
Axel Lite requires a dedicated adapter to be plugged to the AxelEVB-Lite carrier board. This adapter:
- provides the SODIMM socket for the AxelLite SOM
- provides the following additional features:
- microSD slot (for SD boot)
- JTAG connector
- dip-switch for boot mode selection
- routes the signals from the AxelLite pins to the AxelEVB-Lite mating connectors
 There are two versions of the adapter. Revision 0 is used in combination with the AxelEVB-Lite revision 0. Revision A is used in combination with the AxelEVB-Lite revision A. |
Revision 0[edit | edit source]
The following images show the top and bottom views of the AxelEVB-Lite-Adapter revision 0:
Revision A[edit | edit source]
The following images show the top and bottom views of the AxelEVB-Lite-Adapter revision A:
Connectors' pinout[edit | edit source]
J6 - SODIMM connector[edit | edit source]
J6 is a TE Connectivity 204-pin SODIMM socket. The pinout matches the Axel Lite pinout.
J1, J2, J3 - AxelEVB-Lite mating connectors[edit | edit source]
J1, J2 and J3 are Hirose FX8C-140S-SV connectors that match the AxelEVB-Lite SOM connectors' pinout.
J4 - JTAG[edit | edit source]
J4 is a SAMTEC FSI-110-03-G-S connector. The following table reports the connector's pinout:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | DGND | - | - |
| 2 | JTAG_TCK | - | - |
| 3 | JTAG_TMS | - | - |
| 4 | JTAG_TDO | - | - |
| 5 | JTAG_TDI | - | - |
| 6 | JTAG_nTRST | - | - |
| 7 | CPU_PORn | - | - |
| 8 | N.C. | - | - |
| 9 | N.C. | - | - |
| 10 | JTAG_VREF | - | - |
Boot mode selection[edit | edit source]
The following sections detail how to select the boot option depending on the adapter's revision.
For further details, please refer to this page, which describes the available boot modes thoroughly.
Revision 0[edit | edit source]
This adapter provides a switch that allows selecting the boot device according to the following table. The available boot options differ depending on the Axel Lite type. In this regard, there are basically two types: those that are equipped with both NOR and NAND flash, and those that are equipped with NAND flash only.
| Axel Lite type | S1.2
position | |
|---|---|---|
| on | off | |
| NOR and NAND flash | microSD card | NOR flash |
| NAND flash only | microSD card | NAND flash |
It is worth remembering that, when using Axel Lite in combination with AxelEVB-Lite revision 0, the S5, S6, S7, S8, and S9 switches of the carrier board don't affect the boot options.
Revision A[edit | edit source]
Revision A does not integrate any switch. To select the boot source, please use the S9.2 switch provided by the AxelEVB-Lite rev. A board instead.
The selectable boot options differ depending on the Axel Lite type. In this regard, there are basically two types: those that are equipped with both NOR and NAND flash, and those that are equipped with NAND flash only.
| Axel Lite type | S9.2
position | |
|---|---|---|
| on | off | |
| NOR and NAND flash | microSD card | NOR flash |
| NAND flash only | microSD card | NAND flash |
Technical documentation[edit | edit source]
Revision 0[edit | edit source]
Schematics[edit | edit source]
- Orcad: http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-0/axelevb-lite-adapter-CS010214_S.XLADP0000I0R.0.9.1.dsn__0.zip
- PDF: http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-0/axelevb-lite-adapter-CS010214_S.XLADP0000I0R.0.9.1-color.pdf
BOM[edit | edit source]
Layout[edit | edit source]
Mechanical Drawings[edit | edit source]
- DXF (2D): http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-0/axelevb-lite-adapter-CS010214-DXF.zip
- IDF (3D): http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-0/axelevb-lite-adapter-CS010214-IDF.zip
Revision A[edit | edit source]
Schematics[edit | edit source]
- Orcad: http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-A/axelevb-lite-adapter-CS010214A_S.XLADP0000I0R.1.0.0.dsn__0.zip
- PDF: http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-A/axelevb-lite-adapter-CS010214A_S.XLADP0000I0R.1.0.0-color_0.pdf
