Difference between revisions of "AxelEVB-Lite-Adapter (AxelLite)"

From DAVE Developer's Wiki
Jump to: navigation, search
m
(12 intermediate revisions by 3 users not shown)
Line 13: Line 13:
 
** dip-switch for boot mode selection  
 
** dip-switch for boot mode selection  
 
* routes the signals from the AxelLite pins to the AxelEVB-Lite mating connectors
 
* routes the signals from the AxelLite pins to the AxelEVB-Lite mating connectors
 +
 +
{{ImportantMessage|text=This page provides information for the AxelEVB-Lite Adapter board model S-XLADP0000I1R (BOM 2.0.0), provided with XELK kits version 2.1.0 and above. If you have a board from a previous version of the XELK kit (older than 2.1.0), please contact [mailto:support-axel@dave.eu support-axel@dave.eu].}}
  
 
The following images show the top and bottom views of the AxelEVB-Lite-Adapter:
 
The following images show the top and bottom views of the AxelEVB-Lite-Adapter:
Line 59: Line 61:
 
|-
 
|-
 
|10 || JTAG_VREF || - || -
 
|10 || JTAG_VREF || - || -
|-
 
|}
 
 
=== J5 - MicroSD ===
 
 
The signals of the SD1 interface are routed to the J5 microSD memory card connector. The following table reports the connector's pinout:
 
 
{| class="wikitable"
 
|-
 
!Pin#
 
!Pin name
 
!Function
 
!Notes
 
|-
 
|1 ||SD1_DAT2||| DATA[2] || -
 
|-
 
|2 ||SD1_DAT3||| Card Detect/DATA[3] || -
 
|-
 
|3 ||SD1_CMD||| CMD line || -
 
|-
 
|4 ||ADP_3.3V||| Power Supply || -
 
|-
 
|5 ||SD1_CLK||| Clock || -
 
|-
 
|6, 9, 10, 11, 12 ||DGND||| - || -
 
|-
 
|7 ||SD1_DAT0||| DATA[0] || -
 
|-
 
|8 ||SD1_DAT1||| DATA[1] || -
 
|-
 
|13 ||ADP_3.3V|| - ||Pull up to 3.3V with 10K Ohm -
 
 
|-
 
|-
 
|}
 
|}
Line 95: Line 66:
 
== Boot mode selection ==
 
== Boot mode selection ==
  
S1 is a 2-way dip switch for the boot mode selection. The following table reports the available configurations for the two Axel Lite models. For further details, please refer to [[Boot_options_(AxelLite) | Axel Lite boot options]].
+
S1 is a 2-way dip switch for the boot mode selection (PIN: BOOT_MODE_SEL). The following table reports the available configurations for the two Axel Lite models. For further details, please refer to [[Boot_options_(AxelLite) | Axel Lite boot options]].
  
 
=== Boot from SD/NAND ===
 
=== Boot from SD/NAND ===
Line 108: Line 79:
 
|S1.1 || N.C. || - || -
 
|S1.1 || N.C. || - || -
 
|-
 
|-
|S1.2 || ON || Boot from SD || -
+
|S1.2 || ON || BOOT_MODE_SEL = 0<br>Boot from SD || -
 
|-
 
|-
|S1.2 || OFF || Boot from NAND || -
+
|S1.2 || OFF || BOOT_MODE_SEL = 1<br>Boot from NAND || -
 
|-
 
|-
 
|}
 
|}
Line 125: Line 96:
 
|S1.1 || N.C. || - || -
 
|S1.1 || N.C. || - || -
 
|-
 
|-
|S1.2 || ON || Boot from SD || -
+
|S1.2 || ON || BOOT_MODE_SEL = 0<br>Boot from SD || -
 
|-
 
|-
|S1.2 || OFF || Boot from SPI NOR || -
+
|S1.2 || OFF || BOOT_MODE_SEL = 1<br>Boot from SPI NOR || -
 
|-
 
|-
 
|}
 
|}
  
==Schematics==
+
== XELK 2.0.0 ==
* Orcad: http://www.dave.eu/system/files/area-riservata/axel-lite-adapter.dsn_.zip
+
 
* PDF: http://www.dave.eu/system/files/area-riservata/axel-lite-adapter_S.XLADP0000I0R.0.9.1-color.pdf
+
===Schematics===
 +
==== First release ====
 +
* Orcad: https://www.dave.eu/system/files/area-riservata/axelevb-lite-adapter-CS010214_S.XLADP0000I0R.0.9.1.dsn__0.zip
 +
* PDF: https://www.dave.eu/system/files/area-riservata/axelevb-lite-adapter-CS010214_S.XLADP0000I0R.0.9.1-color.pdf
 +
==== Second release ====
 +
* Orcad: https://www.dave.eu/system/files/area-riservata/axelevb-lite-adapter-CS010214A_S.XLADP0000I0R.1.0.0.dsn__0.zip
 +
* PDF: https://www.dave.eu/system/files/area-riservata/axelevb-lite-adapter-CS010214A_S.XLADP0000I0R.1.0.0-color_0.pdf
 +
 
 +
===BOM===
 +
==== First release ====
 +
* https://www.dave.eu/system/files/area-riservata/axelevb-lite-adapter-CS010214_S.XLADP0000I0R.0.9.1.BOM_.csv__0.zip
 +
==== Second release ====
 +
* https://www.dave.eu/system/files/area-riservata/axelevb-lite-adapter-CS010214A_S.XLADP0000I0R.1.0.0.BOM_.csv__0.zip
 +
 
 +
===Layout===
 +
==== First release ====
 +
* https://www.dave.eu/system/files/area-riservata/axelevb-lite-adapter-CS010214A_assem_view_0.pdf
 +
==== Second release ====
 +
* https://www.dave.eu/system/files/area-riservata/axelevb-lite-adapter-CS010214B_assem_view.pdf
 +
 
 +
== XELK 2.2.0 ==
 +
 
 +
===Schematics===
 +
* Orcad: https://www.dave.eu/system/files/area-riservata/axelevb-lite-adapter-CS010214B_S.XLADP0000I1R.2.0.0.dsn_.zip
 +
* PDF: https://www.dave.eu/system/files/area-riservata/axelevb-lite-adapter-CS010214B_S.XLADP0000I1R.2.0.0.pdf
  
==BOM==
+
===BOM===
* http://www.dave.eu/system/files/area-riservata/axel-lite-adapter_BOM_S.XLADP0000I0R.0.9.1.CSV_.zip
+
* https://www.dave.eu/system/files/area-riservata/axelevb-lite-adapter-CS010214B_S.XLADP0000I1R.2.0.0.BOM_.csv_.zip
  
==Layout==
+
===Layout===
* http://www.dave.eu/system/files/area-riservata/axel-lite-adapter-CS010214_componentview.pdf
+
* https://www.dave.eu/system/files/area-riservata/axelevb-lite-adapter-CS010214B_assem_view.pdf
  
 
==CAD Drawings ==
 
==CAD Drawings ==
* DXF (2D): http://www.dave.eu/system/files/area-riservata/axel-lite-adapter-2D-dxf.zip
+
* DXF (2D): https://www.dave.eu/system/files/area-riservata/axelevb-lite-adapter-CS010214B-2D.dxf_.zip
* IDF (3D): http://www.dave.eu/system/files/area-riservata/axel-lite-adapter-3D-idf.zip
+
* IDF (3D): https://www.dave.eu/system/files/area-riservata/axelevb-lite-adapter-CS010214B-3D.idf_.zip

Revision as of 12:52, 17 October 2018

Info Box
Axel-lite 02.png Applies to Axel Lite

Introduction[edit | edit source]

Axel Lite requires a dedicated adapter to be plugged to the AxelEVB-Lite carrier board. This adapter:

  • provides the SODIMM socket for the AxelLite SOM
  • provides the following additional features:
    • microSD slot (for SD boot)
    • JTAG connector
    • dip-switch for boot mode selection
  • routes the signals from the AxelLite pins to the AxelEVB-Lite mating connectors


200px-Emblem-important.svg.png

This page provides information for the AxelEVB-Lite Adapter board model S-XLADP0000I1R (BOM 2.0.0), provided with XELK kits version 2.1.0 and above. If you have a board from a previous version of the XELK kit (older than 2.1.0), please contact support-axel@dave.eu.

The following images show the top and bottom views of the AxelEVB-Lite-Adapter:

Top view
Bottom view

Connectors' pinout[edit | edit source]

J6 - SODIMM connector[edit | edit source]

J6 is a TE Connectivity 204-pin SODIMM socket. The pinout matches the Axel Lite pinout.

J1, J2, J3 - AxelEVB-Lite mating connectors[edit | edit source]

J1, J2 and J3 are Hirose FX8C-140S-SV connectors that match the AxelEVB-Lite SOM connectors' pinout.

J4 - JTAG[edit | edit source]

J4 is a SAMTEC FSI-110-03-G-S connector. The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 DGND - -
2 JTAG_TCK - -
3 JTAG_TMS - -
4 JTAG_TDO - -
5 JTAG_TDI - -
6 JTAG_nTRST - -
7 CPU_PORn - -
8 N.C. - -
9 N.C. - -
10 JTAG_VREF - -

Boot mode selection[edit | edit source]

S1 is a 2-way dip switch for the boot mode selection (PIN: BOOT_MODE_SEL). The following table reports the available configurations for the two Axel Lite models. For further details, please refer to Axel Lite boot options.

Boot from SD/NAND[edit | edit source]

Switch Position Function Notes
S1.1 N.C. - -
S1.2 ON BOOT_MODE_SEL = 0
Boot from SD
-
S1.2 OFF BOOT_MODE_SEL = 1
Boot from NAND
-

Boot from SD/SPI NOR[edit | edit source]

Switch Position Function Notes
S1.1 N.C. - -
S1.2 ON BOOT_MODE_SEL = 0
Boot from SD
-
S1.2 OFF BOOT_MODE_SEL = 1
Boot from SPI NOR
-

XELK 2.0.0[edit | edit source]

Schematics[edit | edit source]

First release[edit | edit source]

Second release[edit | edit source]

BOM[edit | edit source]

First release[edit | edit source]

Second release[edit | edit source]

Layout[edit | edit source]

First release[edit | edit source]

Second release[edit | edit source]

XELK 2.2.0[edit | edit source]

Schematics[edit | edit source]

BOM[edit | edit source]

Layout[edit | edit source]

CAD Drawings[edit | edit source]