* routes the signals from the AxelLite pins to the AxelEVB-Lite mating connectors
{{ImportantMessage|text=This page provides information for the AxelEVB-Lite Adapter board model S-XLADP0000I1R (BOM 2.0.0), provided with XELK kits version 2.1.0 and above. If you have a board from a previous version of the XELK kit (older than 2.1.0), please contact [mailto:support-axel@dave.eu support-axel@dave.eu].}}
The following images show the top and bottom views of the AxelEVB-Lite-Adapter:
The signals of S1 is a 2-way dip switch for the SD1 interface are routed to the J5 microSD memory card connectorboot mode selection (PIN: BOOT_MODE_SEL). The following table reports the connector's pinout:available configurations for the two Axel Lite models. For further details, please refer to [[Boot_options_(AxelLite) | Axel Lite boot options]]. === Boot from SD/NAND ===